THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-795-2278
Thumbs 1
Thumbs 1

AN3C-3A SS BOLT UNDRILLED

Packaged Items
SinglePack of 10
Dash No.Nominal LengthGrip Length
-315/321/16

Overview

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground and threaded after heat treatment. Minimum tensile strength 125,000 PSI. Cadmium plated per specification QQ-P-416A, Type II, Class 3. Available with shank drilled for cotter pin or undrilled for stop nut application, and with or without drilled head for safety wire. Specify bolts to have undrilled shank by adding letter "A" after the dash number. For bolts with drilled head add letter "H" after the AN number. (AN3H-15) See illustrated examples. "C" represents Type 431 Stainless Steel (contains iron which is magnetic). The length of AN aircraft bolts is measured from under the head to the end of the shank. The "grip" is the unthreaded portion of the shank. See table for conversion of length and/or grip to proper AN callout. "C" stands for stainless. Others are cadmium plated.

15% discount on qty of 50-99
20% discount on qty of 100+


Note: Drilled bolts listed above are drilled shank only. To order drilled head only or both drilled head and shank bolts, please use our AN Bolt Selector by clicking the link below.

Click here for the AN Bolt Selector

Reference Chart

  • Frequently Purchased With
  • Customers Also Viewed

Reviews

Have not received , backordered

Lee G Verified Purchase

AN3C-3A SS BOLT UNDRILLED

July 17, 2021

Great to have a good selection SS hardware available in Alaska.

Barry S
May 10, 2021

These are great. I am building a small scale radial engine. Will be using a 32-14 prop, and these are the prop bolts. They are perfect. Mike Brainerd

Mike B
March 8, 2021

Arrived as ordered

John L
February 10, 2021

The bolts that came with my kit were slightly bent so they caused a bushing to warp. The new bolts were perfect!

Greg A
January 4, 2021

It is a great product it got the job done.

Charles B
September 22, 2020

Hello, I have placed hundreds of orders with Aircraft Spruce over the years and this is the first one I have received that was not 100% correct. Most of my orders include various types and quantities of hardware and metals. Included with my order were two AN4-17A bolts and received one AN4-16A (undrilled), and one AN4-15 (drilled). This is not a complaint. I will just add the bolts to my next order. I just want to say that Aircraft Spruce has an outstanding track record and I will remain a loyal customer. Thank You for your great service, Eric Mercer

Eric M
August 11, 2020

Exactly what I ordered. Cant do better than that.

George P
August 10, 2020

Your service is top --- 100%

William C
June 29, 2020

I needed a few small, hard to find bolts for brake calipers for a ‘67 Lotus Elan. Tried quite a few places, both on-line and in some local stores (Hardware stores, Home Depot, AutoZone, etc) . I was able to find them here. Even though it was a small order, it was serviced quickly. I had the parts in just a few days. And the first class mail shipping option saved me quite a bit on shipping. I would definitely recommend.

Anthony J
June 22, 2020

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: How do I add the H after the AN for an AN3 bolt with a drilled head while ordering on-line?

The chart online only offers the bolts with drilled or undrilled shank in both stainless and cadmium. If you wish to order drilled head, you will need to either use the "AN Bolt Selector" which can be foundby searching that phrase on our site, or using the "Order By Part Number" link near the "Cart" icon on each page.

Q: Which nut do I order for AN3-4A?

AN3 bolts use AN365-1032A (Cad Plated) or AN365C-1032 (Stainless) for locknuts and AN310-3 for castle nuts.

Q: Are the stainless bolts (AN3C) the same tensile strength as the cad plated ones?

The tech data sheet does not list a separate tensile strength for corrosion-resistant steel bolts. That would indicate they would be rated the same per the TDS.

Q: What are the quantities for price breaks and the standard package quantities? I know you'll send any quantity, but I'd order above the price breaks and in multiples of the package quantities if they were listed.

The discount schedule for large quantities are: 50-100 = 15% / 100+ = 20%. Package quantities are usually 25 but we can sort them however you prefer as long as you mention it in special instructions at checkout.

Q: Can you offer the CofC for AN3 bolts?

Yes, material certs can be provided. They must be requested at the time of checkout in the shopping cart. Additional fees may apply.

Q: AN Bolt Selector Do you carry close tolerance bolts? How are they designated? I need AN3 close tolerance bolts with a 1 grip length. Thanks.

A close tolerance version with a 1 grip would be AN173-13.

View in Catalog

View Image View in Catalog