THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-795-2278
Thumbs 1
Thumbs 1

Bolt Undrilled AN3-11A

Packaged Items
SinglePack of 25
Dash No.Nominal LengthGrip Length
-111-5/323/4

Overview

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground and threaded after heat treatment. Minimum tensile strength 125,000 PSI. Cadmium plated per specification QQ-P-416A, Type II, Class 3. Available with shank drilled for cotter pin or undrilled for stop nut application, and with or without drilled head for safety wire. Specify bolts to have undrilled shank by adding letter "A" after the dash number. For bolts with drilled head add letter "H" after the AN number. (AN3H-15) See illustrated examples. "C" represents Type 431 Stainless Steel (contains iron which is magnetic). The length of AN aircraft bolts is measured from under the head to the end of the shank. The "grip" is the unthreaded portion of the shank. See table for conversion of length and/or grip to proper AN callout. "C" stands for stainless. Others are cadmium plated.

15% discount on qty of 50-99
20% discount on qty of 100+


Note: Drilled bolts listed above are drilled shank only. To order drilled head only or both drilled head and shank bolts, please use our AN Bolt Selector by clicking the link below.

Click here for the AN Bolt Selector

Reference Chart

Reviews

Sam C Verified Purchase

Bolt Undrilled AN3-11A

November 15, 2024

Yep they’s straight with thread’s everything you’d hope they had

K B Verified Purchase

Bolt Undrilled AN3-11A (Pack Of 25)

March 4, 2024

Sam P Verified Purchase

Bolt Undrilled AN3-11A

February 15, 2024

Ron F Verified Purchase

Bolt Undrilled AN3-11A (Pack Of 25)

November 4, 2023

exactly as advertised in the catalog and very reasonably priced. telephone call service was very knowledgeable in the product details.

Robert H Verified Purchase

Bolt Undrilled AN3-11A

May 23, 2023

Magaero L Verified Purchase

Bolt Undrilled AN3-11A (Pack Of 25)

April 22, 2023

Timothy L Verified Purchase

Bolt Undrilled AN3-11A

November 19, 2022

Correct bolts for my piper

Stephan F Verified Purchase

Bolt Undrilled AN3-11A

September 15, 2022

Dennis O Verified Purchase

Bolt Undrilled AN3-11A

July 7, 2022

Timothy L Verified Purchase

Bolt Undrilled AN3-11A

June 28, 2022

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: How do I add the H after the AN for an AN3 bolt with a drilled head while ordering on-line?

The chart online only offers the bolts with drilled or undrilled shank in both stainless and cadmium. If you wish to order drilled head, you will need to either use the "AN Bolt Selector" which can be foundby searching that phrase on our site, or using the "Order By Part Number" link near the "Cart" icon on each page.

Q: Which nut do I order for AN3-4A?

AN3 bolts use AN365-1032A (Cad Plated) or AN365C-1032 (Stainless) for locknuts and AN310-3 for castle nuts.

Q: Are the stainless bolts (AN3C) the same tensile strength as the cad plated ones?

The tech data sheet does not list a separate tensile strength for corrosion-resistant steel bolts. That would indicate they would be rated the same per the TDS.

Q: What are the quantities for price breaks and the standard package quantities? I know you'll send any quantity, but I'd order above the price breaks and in multiples of the package quantities if they were listed.

The discount schedule for large quantities are: 50-100 = 15% / 100+ = 20%. Package quantities are usually 25 but we can sort them however you prefer as long as you mention it in special instructions at checkout.

Q: Can you offer the CofC for AN3 bolts?

Yes, material certs can be provided. They must be requested at the time of checkout in the shopping cart. Additional fees may apply.

Q: AN Bolt Selector Do you carry close tolerance bolts? How are they designated? I need AN3 close tolerance bolts with a 1 grip length. Thanks.

A close tolerance version with a 1 grip would be AN173-13.

View in Catalog

View Image View in Catalog