THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-795-2278

Push Button Switch

$16.50/Each
Quantity
Add to Wishlist
Part# 10-00821
MFR Model# 44047/44053

Overview

A quality momentary SPST switch, perfect as a starter button, Comes with a special boot that keeps out dust and weather.

  • Frequently Purchased With
  • Customers Also Viewed

Reviews

Keiji K Verified Purchase

PUSHBUTTON SWITCH W/BOOT

November 5, 2021

I concur with the others that switch takes WAY too hard to push. I ended up buying a BEP switch from West Marine, rated for 35amps, DC. In any case, if youre working with DC current, be sure to get a switch rated for DC. On disconnect, a switch can arc. With AC, the arc will be extinguished at the next half-cycle. But with DC, it can continue - unless the switch is designed to handle the problem. In that case, it will be specifically rated for DC use. Aircraft Spruce: replace this with a Cole Hersee switch or similar even though they cost more.

Stephen B
December 30, 2022

This is not a perfect starter switch. This thing is massive, and takes 10 lbs of push to engage. Heres the measurements that are lacking in the description. 1/1/8th x 1/1/2 x1/14 to the start of the shaft threads. 2/5 from end screws to button tip. 3/4 of shaft thread, and a 5/8 shaft diameter. Thats a big hole. This is the perfect switch for launching a nuclear warhead from a submarine.

Duffy F
February 6, 2021

This push button starter switch is massive. Way too big to use as a replacement for your plane. Spruce needs a smaller switch.

Gary L
October 16, 2020

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What is the panel hole diameter for mounting the switch? What are the other switch dimensions?

The dimensions of the switch (part number 10-00821) stem is 3/4 inches long x 5/8 inches diameter. Panel hole diameter must be determined by installer at time of install. Aircraft Spruce cannot be held responsible for panel work done ahead of time based on these dimensions.

Q: What is the diameter if the boot for the switch?

The diameter for the boot on the push button switch (10-00821) is 1.05"

Q: What gauge wire should be used with this switch?

The wire gauge will depend on the amperage and distance. Please consult with the AC 43.13 part number 13-06923.

Q: How many volts is this switch rated for?

Rated for 15 amps at 12-VOLTS.

Q: Is this swich suitable for 24V systems?

No. It is only rated for 12volts per the TDS.

View in Catalog

View Image View in Catalog