Filter for Aeronca 7AC and 11AC
For new installation, P/N 24306 and P/N 24308 are required.
Wasnt a fan when I received this filter the paint was flaking off and filter itself is made of a fibrous material sheds significantly. I didnt want those fiber ending up in my engine. It also does not include the pins to attach it.
AER 7AC,11AC AIRMAZE AIRFILTER
Looks and is exactly like the factory made part. It seems like there should be a gasket to seal it better to the housing but I have not been able to easily find the number.
Aeronca Champ,as advertised
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, the filter can be cleaned with solvent and re-oiled.
Use oil by dipping in Grade 1 or Grade 2 of MIL-L-21260. This will be stated on the instructions of the product.
No, this would not come with a gasket. This would come exactly as shown in the display picture.
The vendor recommends a MIL-L-21260 oil, like LPS 2 or Marvel oil.
6 x 5-1/2 x 1-1/2.
5 x 4.5 x 1.25
Per filter vendor: Just a light weight oil, similar to WD40 or LPS, or Marvel Mystery oil.