|Brackett Model No.||Aircraft||Size||Part Number||Price||Buy|
|T-1030||Aerostar 600, 700P |
Baron, Bonanza Axle Towing (L)
|T-1100||Universal||1.1 OD .750 OD (2 Required)|
|T-1375||Universal||1.375 ID 1.750 OD (2 Required)|
|T-1500||Universal||1.500 OD (2 Required)|
|T-260||Universal||2.60 OD (2 Required)|
|T-349||Universal||.349 OD (2 Required)|
|T-375||Socata Trinidad, Tobago||2 Required|
|T-451||Pilatus PC12 / TBM 700||.451 OD (2 Required)|
|98404A011||Quick Release Pin||--|
|T-840||Extender / Piper / Arrow / Lance||.840 OD .640 ID|
|T-820||Malibu / Mirage / Meridian||.820 OD (2 Required)|
|T-515||Bell||.515 ID (2 Required)|
|T-535||Epic LT||2 Required|
|T-625||Augusta 109||2 Required|
|T-700||Diamond DA-42||.700 ID (2 Required)|
|T-730||L-39 Jet / T-28 Lancair |
Albatros Aero L39C / L39ZA (L)
|.730 OD .320 ID (2 Required)|
|T-795||Piper / Lance / Saratoga||.795 OD .320 ID (2 Required)|
|T-PC6||Pilatus PC-6||2 Required|
|TWA-10||Champion Aircraft||2 Required|
|TWA-11||Howard DGA||2 Required|
|TWA-DH||Baron, Bonanza Axle Towing (R) |
Dehaviland Beaver DHC-2
|T-910||Albatros Aero L39ZA (R)||--|
|T-960||Albatros Aero L39C (R)||--|
|T-DEX||Duchess||.750 OD (2 Required)|
|T-N182||Cessna 152, 172, 182, 206||.625 ID (2 Required)|
|T-P228||Piper PA-22, 28 / YAK 18 / GIPPSAERO GA8||(2 Required)|
Note: Quick release pins are included with adapters.
Aircraft Application Guide
BRACKETT UNIVERSAL ADAPTER CIRRUS .349 OD REQUIRES 2
Great product works well, well made. Recommend to everyone
Bought 2 T-750 tips for use on RV nosewheel, as recommended. They are beautifully made. But two notes. 1/ the tips come with the needed pins, so the two pins I bought are not needed. I didnt see a comment on that in the item page, but I see it in the comments of Jim F. 2/ the T-750s are short, too short to get through the existing hole in my nosewheel fairing. I could try to enlarge the hole, but will see if the T-N182 tips, which have a longer reach, will accommodate the RV nosewheel axle bolt.
Well-machined part that shows typical good Brackett quality. The description needs to be updated to let you know that the part includes a set of .25 quick release pins so that you dont order an additional set unnecessarily (like I did!).
Bought for HA420 Hondajet for use on a Brackett 34 towbar. They come with quick remove pins and fit snug in the tow bar. However they do have a lot of clearance on the nosegear so there is some slop at that point. Looked at several suppliers that had 3-4 week delivery, Aircraft Spruce had 3 of the 6 I required in stock and I had them in Canada within a few days of the order.
I had hoped the quick release pin would fit my tow bar, but my tow bar requires a 1/4 pin and this pin is much smaller (3/16 or smaller?)
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
You will need two of P/N# 13-16106.
This aircraft would not require an adapter to work with the Brackett tow bars.
You would need 2 x T-349 adapters, our part number 13-16095.