Ordered towbar for Stinson 108 to use away from home base. It fit well, is sturdy and lightweight. Good choice for going into airports that rarely see conventional gear aircraft.
TOWBAR SCOTT TAILWHEEL
The tow bar work great on my 1947 Funk tail wheel!👍
TOWBAR SCOTT TAILWHEEL
Arrived promptly, I use this model for both Decathlon and Christen Eagle.
TOWBAR SCOTT TAILWHEEL
Does the job for my C180
TOWBAR SCOTT TAILWHEEL
Works great for dragging or pushing my Pacer around. Collapses to fit into the luggage compartment but Ill probably do as others did and drill another hole by the T part of the handle so you can slide the handle through the pipe instead of having to turn the handle around. Nice length clearing the elevator and giving good leverage. Paint is thick, soft, and will probably chip off with more use but its a tool to be used and not for show.
TOWBAR SCOTT TAILWHEEL
Works great
TOWBAR SCOTT TAILWHEEL
Ordered for our C170. The tubes are welded on slightly twisted where they hook to the tailwheel. Still pulls the airplane just fine but there is a large gap on each side that I hope doesnt get worse with regular use.
TOWBAR SCOTT TAILWHEEL
The tow bar fits the rear-wheel of my RV8. I feel the spring tension could be higher to clamp down the bar as I push the plane in and out of the hangar. I will be replacing the spring with something stiffer.
TOWBAR SCOTT TAILWHEEL
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.