Westach Engine Analyzer 6 Cylinder CHT Kits 18MM

CHT probe for analog gauge

Kevin S Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

Works great

Vincent S Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

The CNT Probe is well made and with 18mm washer as ordered. Good service and promptly delivered. Who can ask for more?

Roberto Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

Perfect

Dardo G Verified Purchase

Westach 2-1/4 Square CHT 100-650F 2A1 Non-TSO

Just bench tested these and will update the review in the future. A key feature of these CHT probes is 4 foot metal shielding, which allows splice insulation to survive outside of the hot engine compartment, compared to short lead parts.

Donelson L Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

Just bench tested these and will update the review in the future. A key feature of these CHT probes is 4 foot metal shielding, which allows splice insulation to survive outside of the hot engine compartment, compared to short lead parts.

Donelson L Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

Just bench tested these and will update the review in the future. A key feature of these CHT probes is 4 foot metal shielding, which allows splice insulation to survive outside of the hot engine compartment, compared to short lead parts.

Donelson L Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

Works great

Peter H Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

perfect fit. works good.

Terry Z Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

Worked great

Thomas E Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

Works perfectly

Clay C Verified Purchase

Westach 2-1/4 Square CHT 100-650F 2A1 Non-TSO

I had to return the first one of these I purchased as it was defective. The switch only had 4 positions even though it had the right number of leads for 6 sensors. The replacement worked correctly.

Daniel D Verified Purchase

Westach 6 Position Switch With 8 Lead 254-6F Non-TSO

Im glad I before cutting hole in panel. This is not a 2 1/4 instrument. Its only 21/16 . It might work in a 2 1/4 hole but would be really hard to center.

James M Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

This replaced similar with broken thermocouple wire to ring connection. Arrived promptly, works as intended

William L Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

as advertised

Gerald Verified Purchase

Westach 2-1/4 Square CHT 100-650F 2A1 Non-TSO

Will not work

Dan L Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

Called for replacement, worked well

Duane Verified Purchase

Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO

Works great! I initially bought the more expensive temperature compensated gauge which did not work at all. Apparently it was defective out of the box. I replaced it with this and finally have a gauge that works. Very pleased with it.

After installing the switch, the system failed to work. In checking the system for continuity using an ohm meter, we found that the factory installed connecter on the white wire to the gauge had not crimped the bare wire. A simple fix but a frustrating time sourcing the problem.

James H Verified Purchase

Westach 6 Position Switch With 8 Lead 254-6F Non-TSO

The casting of the case is unacceptable in any case (tso or not) The back plate still has spurs from the molding process. The back plate bows in the middle between all four corners. I have not installed or run this gauge, but not expecting much. This gauge would be OK at $30-40.