| NSL890RC B1/2 is a rapid-cure, fuel resistant aerospace and aviation sealant. It offers a faster cure time so you can get your job done more quickly. It is intended for use on integral fuel tanks and pressurized cabins as well as other areas subject to contact with aircraft fuels, lubricants, oils, water and/or weathering. This is an FAA-approved PMA replacement for PPG’s PS-890B1/2 sealant that cures at least 70% faster. |
This cartridge-based ProSeal is so much easier to use than the bulk pack. The rod sticking up out of the cartridge is attached to a mixing paddle inside the cartridge. You use the solid rod to break the seal and push the hardener down into the resin, then pump the hollow rod up and down to mix it. It is intended to be used in a gun similar to an ordinary caulk gun, but you can easily use the caulk gun to apply it by using a 1 x 4 wooden dowel with a rounded end to adapt the plunger on the caulk gun to the cartridge. One cartridge is more than enough to do one filler neck fillet, and might even be enough to do two.
NSL PMA Rapid Cure Sealant NSL890RC B-1/2 - 2 Oz. Cartridge
Worked great to seal aluminum smoke oil tank.
NSL PMA Rapid Cure Sealant NSL890RC B-1/2 - 2 Oz. Cartridge
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.