Bose A20 6-pin Redel to GA Adapter
Allows you to use a Bose A20 panel powered headset in a fixed wing aircraft that is not specifically wired with a 6-pin Redel connector. Simply plug your 6-pin Redel connector from the Bose A20 to this adapter and you'll have dual plugs that can be used in almost any fixed wing aircraft. Part # PA-89/A20.
PILOT A20 6 PIN TO GA ADAPTER
No, this will only work on the Bose A20 headset.
Please use part number 11-03570 to go from a Bose X Lemo plug to Dual GA Plugs. See "Alternate Items".
No, please see part number 11-03570 for the Tango.
Yes, this will work with the AKG AV100.
Yes, the David Clark One-XP has AA battery integration in the control module. Since it has the AA battery capability. this adapter will work fine. Remember, when using this adapter, the headset ANR will be powered from the AA batteries and not from ship's power.
The Bose A20 6-pin lemo cable has a place for batteries. You will need to have the batteries in the cable assembly for the ANR to work.
If your ANR headset has a battery power assembly module, then this adapter can be used. If you have an older version of the A20 or a Bose X, you will need Part # 11-03570 which has a 9 volt power supply to run the ANR.
Yes, please see part # 11-06533.
No, this is designed to work with the aviation headsets with the 6-pin Lemo plug.
Yes, it will work with the PFX 6-pin lemo version.