Add to Wishlist
Part# 13-22751


FlyTies® Tie Downs
Rated "Top Choice" by Aviation Consumer

FlyTies® unique design allows quick insertion and quick removal using the easy-out extraction tool provided. Rugged, die-cast steel rods are 3/8" x 14" for deeper penetration into subsoil. Cumulative load capacity is 3,600 lbs. Kit includes 3 ea. aluminum hubs, 9 ea. steel rods, 3 ea. 3/8" x 10 ' ropes, easy-out removal tool, and rugged compact canvas tote bag. Complete kit weighs only 7.4 lbs.


  • Easy to assemble
  • Self cleaning action
  • Use in most unpaved surfaces
  • Long ropes for even the highest general aviation wings
  • Heavy duty canvas tote bag
  • Corrosion resistant
  • Weighs only 7.4 lbs.
  • Lifetime warranty


  • Dedication to Aviation Business: Designed by pilots-for pilots. In business for 9 years with its sole purpose being to perfect tie down stake technology.
  • Ease of Removal from Ground: Special extraction tool (provided) that allows quick and easy “straight out” removal. No side loading. Little effort exerted on operator even in hard soils.
  • Safety: Small footprint. Small surface area on the ground. (less than 3” in dia.)
  • Length of Stakes: 14 Inches
  • Type of Steel: Each stake is die-cast steel. High tinsel strength. Higher resistance to bending than heat treated or cold roll process.
  • Eyebolt: 1-1/4 inch structural forged steel eyebolt with 5/16 inch shank. Rated for 1500 lbs.
  • Rope: Three strand polyester. Non-moisture absorbent. #1 recommendation by Aviation Consumer for rope of choice for pilots.
  • Hub: Strong, impact resistant, lightweight aluminum. Same material used on the space shuttle. Also, hockey pucks.
  • Ground Holding Area: By design, rods are directed down and OUTward to reach out to the maximum ground area possible.

In The Box

  • 3 ea. aluminum hubs w/ forged steel eyebolt
  • 9 ea. 3/8" dia. x 14" steel stakes
  • 1 ea. extractor tool
  • 1 ea. heavy duty canvas tote bag
  • 1 ea. set of instructions
  • 3 ea. polypropelyne ropes


Worked great for me. The build quality it really nice. The little pucks are machined and the spikes comes with little protector caps which is a nice touch for when you are storing them in the bag so they dont poke through.

Michael L Verified Purchase


October 20, 2021

Well built and nicely packaged in the carrying case.

Tyler H Verified Purchase


October 5, 2021

Nice kit, compact, rope is quality, STRONG and sturdy, couldnt be happier. Just beware- if you are pounding the stakes into really compacted hard dirt, they are hard to remove with the tool. Its best to have some vice-grips to at least get them turning first, then use the tool. I was certain that to get them started turning with the tool might bend the tool, hence the vice grips.

Reid B Verified Purchase


September 13, 2021

Worked great in some strong winds in North Central Montana.

Dave M
October 6, 2020

works great, compact, easy to set up and remove, seems strong. i like how they dont include a hammer, why raise the price and include a hammer which everyone has. i use the back of a hatchet to drive the spikes, the hatchet doubles as a survival tool if needed.

September 14, 2020

Purchased these tie downs for a trip to the Oshkosh airshow, they worked great! Previously used a set of screw in tie downs (dog tie out style) which sere very difficult to install into the ground, the Flyties spikes hammered in very easily and removed easily with the included tool. Very pleased!

July 26, 2019

This is by far and away the best tie down solution Ive tried. The corkscrew and auger types can take forever to set in hard or rocky soils in some cases, nearly impossible. Taking them out usually involves bending them from the high friction. Flyties are super simple to drive AND to remove. Very nice design. Good job, folks.

June 17, 2019

Used to tie down on a dirt strip. This tiedown kit solidly worked whereas another type of tiedown kit would not even hold when screwed into the dirt. It may be heavy but it works.

September 2, 2017

I like the design. I liked Bruce at Flyties when I called him about the kit. I liked that he shipped within hours of my placing the order. However, beware that the kit does not weigh 6 pounds: it weighs 7 to 8 lbs to which one must add the 3 pounds of the hammer. Had I known the actual weight, would I have ordered the lighter Portable Tie-down Anchor Kit that I was used to or the Flyties? hard to say. I will keep the FLYTIES because I like the concept I think that it is superior—but I am disappointed in the weight. Yet, should my plane ever be caught in a gale on the ground I may be grateful yet!

Pete O
November 19, 2015


Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

View in Catalog

View Image View in Catalog