Worked fantastic. They come with the threads oblong so there is a lock nut action.

Ben Verified Purchase

FLOATING CLIP NUT 4972-6-82

Just what I needed. Good quality at a fair price

Ed C Verified Purchase

FLOATING CLIP NUT 3D0039-3

Great source for hard to find connectors

Randy O Verified Purchase

FLOATING CLIP NUT 4972-1032

Works as designed.

Edwin S Verified Purchase

FLOATING CLIP NUT 4972-6-82

Over the last few months I have purchased at least a couple of every size floating clip but (both LHA & Monadnock).

David S Verified Purchase

FLOATING CLIP NUT 4972-6-82

There really needs to be a chart that combines data for the LHA4972 & Monadnock clip nuts. e.g.: P/N | ScrewSize | LHA v Monadnock | PanelThicknessRange | C-Max (CtrOfHoleToEdge) | Price. 04-00151 | 6-32 |M| .030-.051 || .180-.120 | 3.95 . 4972-5-62 | 6-32 |L| .030-.062 || .281 | 2.27 . 04-00152 | 8-32 |M| .020-.090 || .310-.500 | 2.15 . 4972-6-82 | 8-32 |L| .020-.125 || .375 | 1.59 . 04-00153 | 10-32 |M| .020-.090 || .350-.500 | 1.88 . 04-01489 | 10-32 |L| .020-.090 || .385 | 2.25 .

David S Verified Purchase

FLOATING CLIP NUT 4972-6-82

Great quality Hardware!

Westwood A Verified Purchase

FLOATING CLIP NUT 4972-6-82

Good product.

George K Verified Purchase

FLOATING CLIP NUT 4972-1032

They work as advertised.

Very good alternative to the tinnerman style clips typically used in factory installations with sheet metal screws for things like attaching the glare shield or even securing covers on instrument panels. Cost more, works much better, lasts much longer, and you dont have pointy sheet metal screws behind the panel to rip the flesh of unsuspecting mechanics. Less bloodshed is good :-)

Excellent service from the US stores. Wish I could had the same from the European one

Need to have something to separate the clip to get it in place. Once locked in it is going anywhere!

Hans M Verified Purchase

FLOATING CLIP NUT 3D0039-3

Over the last few months I have purchased at least a couple of every size floating clip nut (both LHA and Monadnock) that Spruce sells. On every single one, the nut seems to have been crushed to elongate the threaded hole. As a result, excessive effort is required to both install a screw AND remove it. I dont know if this elongation is a defect, or if it is part of the design. Where I use them, the screws need to be removed periodically. This elongation is problematic because the extreme tightness frequently causes the screw head to get bunged on removal. It is possible to re-tap the nuts to the specified size to facilitate later removal of the screw. If you are buying new clip-nuts only because the old ones are holding the screws too tightly, the new clip-nuts may not solve your problem.

David S Verified Purchase

FLOATING CLIP NUT 4972-6-82

these were 10/32 but each one needed to be re-tapped because the threads were smashed egg-shaped

Steve J Verified Purchase

FLOATING CLIP NUT 4972-1032