|Mfg Model #||Lens Color||Mount||Base||Remarks||Part Number||Price||Buy|
|9004402||White||Upper||5 Hole||Standard Assembly (FAA TSO-C96a)|
|9004403||Red||Lower||5 Hole||Standard Assembly (FAA TSO-C96a)|
|9004404||White||Lower||5 Hole||Standard Assembly (FAA TSO-C96a)|
|9004410||White||Upper||5 Hole||Capable of synchronizing flash rate with other like unit (FAA TSO-C96a)|
|9004415||Red||Lower||5 Hole||Slave unit (FAA TSO-C96a)|
|9004417||Red||Upper||8 Hole||Standard Assembly (FAA TSO-C96a)|
|9004418||White||Upper||8 Hole||Standard Assembly (FAA TSO-C96a)|
|9004419||Red||Lower||8 Hole||Standard Assembly (FAA TSO-C96a)|
|9004420||White||Lower||8 Hole||Standard Assembly (FAA TSO-C96a)|
|9004453||White||Lower||8 Hole||Masked lens (Factory intalled on Beech Barons) (FAA TSO-C96a)|
|9004434||White||Upper||5 Hole||2.25lbs. Rudder mount (Citations) (FAA TSO-C96a)|
|9004441||Red||Lower||9 Hole||Special 9 hole mounting plate (FAA TSO-C96a)|
|9004433||Red||Upper||5 Hole||2.25 lbs. Rudder mount (Citations)|
|9004454||Red||Lower||5 Hole||Lens has 2 drain holes & bottom mounted input connector (Hawker 800) (FAA TSO-C96a)|
|9004455||Red||Upper||5 Hole||Single input connector (Hawker 800) (FAA TSO-C96a)|
|9004456||Red||Lower||5 Hole||Lens has 2 drain holes & single input connector (Older Hawkers) (FAA TSO-C96a)|
|9004457||Red||Upper||5 Hole||2.25lbs., cable pigtail (Beech Barons) (FAA TSO-C96a)|
|9004458||White||Upper||5 Hole||2.25lbs, cable pigtail (Beech Barons) (FAA TSO-C96a)|
90044 series self-contained, 150 watt, quartz halogen flashing anti-collision light. Factory installed on Lear 31, Falcon 900 and Cessna Citation X. It is also a direct replacement for oscillating beacons on most corporate aircraft.
To determine model required for replacement, the following information is needed: Lens color (red or white), upper or lower mounting location, number of mounting holes (5, 8, or 9), weight and position installed. Beacons installed on the rudder, (example: Citations and Barons) require a 2.25 lb. assembly.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.