|Stability and mobility all in one! Our base mount will keep your compatible aviation unit secure and in reach for navigating on the fly.|
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The GDL 50 is replacing the GDL 39 3D. The features of the GDL 50 are the same, it will give you ADS-B in weather and traffic, attitude data, and GPS. The GDL 51 is the same as the GDL 50, except instead of ADS-B weather and traffic, it a SiriusXM receiver. And the GDL 52 combines both, so it is ADS-B in, SiriusXM, GPS, and attitude data. None of these boxes provide ADS-B out compliance.
Yes, mounting bracket Part # 11-15524 is the same one in the box with the GDL52 Part # (11-15315/11-15316). The Ram Holder, part # 11-09853 does not fit the hole pattern, it is compatible with the Aera 500/510/550/560/660.
Yes, this mount can be used under a glare shield as long as it is not a metal material as it may interfere with the GPS, XM and ADS-B signal. As this unit uses three antennas you can use a remote GPS antenna via part number 11-00052, for XM you can order part # 11-17587 but there is not a remote option for the ADS-B flip antenna on the unit.
Per Garmin: We do not recommend inverted install. It should work but it is non standard and the same performance cannot be guaranteed.
Yes, this will work with the GDL 50 as well as the 51 and 52.