|ES6209 is a translucent, straw colored two component epoxy adhesive with a thick, liquid consistency. ES6209 is an excellent structural adhesive for use when good flow and surface wetting are required. Though pourable it has a controlled flow viscosity to minimize run-out from the adhesive joint. The 1 to 1 combining ratio by weight or volume makes it easy to measure and mix. The working time of over an hour provides plenty of time to coat and assemble the materials to be bonded. ES6209 has excellent adhesion to composite and metal parts typically used in kit plane construction. It bonds rigid foam, wood, ceramics, fiberglass and most metals with ease. When the ES 6209 is cured it provides tough, durable structural joints. Mix Ratio: 1 to 1 by weight or volume; Color: Translucent Amber, Mixed Viscosity: 45,000-55,000cps; Pot Life 4fl. oz. Mass: 60-90 min @ 77°F; Cure Time @ 77°F 18-24 hrs, @ 140°F 2-3 hrs.|
Works as advertised. Only thing to note is that per the manufacturers data sheet, this is sold by weight (1.75 lbs each.) Upon opening the cans they are less than full (one appeared about 2/3 full) however both cans weigh 2 lbs. Since the volumes are different, it would be prudent to mix these by weight rather than volume even though the data sheet indicates that either method can be used.
Great structural resin for rocketry projects!
I use it for building high-power rockets where strength is critical -- thrust rings, through-the-wall fins, shock cord attachments, etc. Slow cure with minimum out-flow, its perfect for laying in fillets on the fin-to-airframe joint.
After testing several epoxy products for farm and family, then using this epoxy over a ten year period on numerous many materials, the ES6209 Aeropoxy has yet to fail. Nothing compares. Resulting joint appears to remain in a non-brittle state after years of placement. Make sure all surfaces are fully saturated before assembling with clamping. Excess glue is easily removed with hand tools clean to joint, if desired, after hardening overnight.
This adhesive is in a quart container. We have since added this info to the title of the webpage.
The ES6209 works very well, but the ES6228 is designed for metal bonding and would work better. We have added the ES6228 as an "Alternate Item" to this web page. Please check the "Alternate Items" tab for a link to that web page.
This product is sold as a kit, both parts A and B will be included with part # 01-00295.
1 year from the date of shipment.
The pot life at 77 degrees F is 60-90 minutes.
The west system pumps (01-00318) will dispense the epoxy from these cans. The ratios would not be correct but these would pump from the cans.