|EZ Turn is a specialty lubricant/sealant used for fuel and oil line valves & is resistant to high temps. Especially effective where high octane fuels and aromatics are present. EZ Turn is also extremely efficient as a gasket paste & anti-seize agent. EZ Turn will not gum, crack or dry out. Each shipment is independently tested. Excellent for tapered plug valves, aircraft engine manufacturing, and marine applications. EZ Turn is the functional equivalent of fuel lube.|
My application is on the cork fuel tap plungers of a vintage British motorcycle. It makes a usually difficult task extremely easy. Highly recommended.
EZ TURN (FUELLUBE) 5 OZ TUBE
I have spent years trying to find petcocks that dont leak for my 1936 Harley-Davidson. I have replaced them several times, tried valve lapping compound, and even some gas proof pipe dope with only some temporary success. Finally a friend told me about EZ Turn. Its only been a couple weeks, but so far, so good. No leaks yet!
EZ TURN (FUELLUBE) 5 OZ TUBE
I used EZ Turn Lubricant for a rotary hand pump for a portable 30 gallon premium gasoline fuel tank. It created the seal I had hoped for and lubricated the internal moving parts perfectly without having to re- lubricate multiple times due to dissolving in fuel like other lubricants I have tried. Works like a dream. Very glad I got EZ Turn Lubricant and highly suggest and recomend it.
So far so good, product has held up to everything I have applied it too. Great product !
Great stuff, helps keep those packings from drying out in the fuel system.
Works great on O rings that will be in fuel soaked areas!
I purchased the EZ Turn on the recommendation of a friend, and WOW, I have not been disappointed! I used this on a carburetor rebuild where leaking was a concern. Not only did it make assembly a snap, it will make rebuilding at a later date easier as well. Because of the heat we experience here in Arizona, gaskets sticking to the body of carburetors can be a real concern. EZ Turn has made my life so much easier.
Am using it to lubricate aircraft primer plunger. Works very well. We run the Rotax engine on autogas with 10% ethanol, and other lubricants wouldnt work well. Hope that the different formulation of this lubricant will work better.
Love the product. Im not using it for aircraft. EZ Turn has become a must-have in the toolbox of folks who drive Model T Fords! They tend to leak like sieves! Service was great with immediate turnaround of the order.
I am in the process of rebuilding and reinstalling the carburetor on my 1985 Oldsmobile Toronado. I did not want to use any tape to seal the gasoline and primary ported vacuum lines. Reading from sources online sent me to a product called Jet Lube, from Aircraft Spruce. The new product name is EZ Turn. I ordered the item online and went to pick it via will call on Friday. What a big building, and right across from Fender Guitars, too! Great location. I had heard of Aircraft Spruce because my wife applied for a position there last Spring. She could not answer their return call request in time and so the job went to someone else. I had also read up on the family history of the company and was extremely impressed by what I found! The EZ Turn was put on the requisite lines the day I got it. The car will be finished as soon as I get one more carburetor brass inlet line from a similar Oldsmobile 307 V8 in a local wrecking yard.
Yes, the EZ-Turn Lubricant can be used on threads for fuel applications.
The EZ-Turn is the same as the old Fuel-Lube, and can be used for o-rings in a fuel application.
Yes, per the tech data sheet, this meets:
Mil-G-6032D Am I Type I
730 days from date of manufacture.
Please review the document tab and review the technical data sheet to determine if this can be used for your application.
24 months from shipping date.
The shelf life is 24 months.
You would want to use DC-4 on champions and nothing on the Tempest filters.