Note: All sizes and types sold in 50 yard rolls
A layer of 2.7 oz. Dacron fabric strips or tape laminated into a layup as if it were an extra ply of glass. The peel coat wets out with epoxy like glass cloth and cures along with the rest of the layup. However, the Dacron does not adhere structurally to the glass and when peeled away it leaves a surface ready for glass-to-glass bonding without sanding. Poly/Dacron blend is excellent as peel ply for composite lay-ups.
Ordered a roll of 4 peel ply for a current build. This product is the real deal, works perfectly on seams so less work finishing. Great product, easy on line order, prompt delivery, excellent price.
The 3-inch wide Peel Ply with pinked edges peels up nicely after cure without leaving behind stray strings.
Works great and is a lot easier than making it myself from sheets of peel-ply. The pinked edges are also great for minimizing stray nylon fibers.
YAY! The 1 wide tape 09-15000 arrived with FINISHED EDGES! No more frayed edge threads stuck in the epoxy when used as peel-ply.
Great job supplying Peel Ply for my, now 42 year LongEZ N724DT project. I have relied on Aircraft Spruce for the entire project and have never been disappointed with their service and support. See www.OnWingsofGlass.com for a history of my never ending project and long deferred dream of flying my own aircraft. When I take to the wild blue yonder on my wings of glass, Ill forever shake the bonds of earth and soar with the Eagles!
School uses it for Peel Ply on Composite project. Leaves a nice smooth finish for overlap.
While building a 50% scale Dalotel, I like to put in as many details as possible and this product is another part of it ,
Very poorly cut, with so many strings hanging off the edges was hard to use.
This Dacron (TM) polyester tape works well as peel ply, leaving a near-sanded finish on the epoxy surface when its ripped off. However, there is no longer any binding on the edges. It appears that the rolls are cut from a much wider roll, leaving loose threads on the edges which are left embedded in the epoxy when the tape is pulled off. These threads are very difficult and time consuming to remove. This does not happen with tapes with bound edges.
Pinked refers to the edge of the tape. There are straight edges and pinked edges. Pinked is a teeth-like pattern on the edge of the tape. "Pinked edges are used to increase the amount of surface that can actually adhere to the aircraft fabric when the tape is cemented in place. The actual edge area that will be cemented in place increases by over 41% when pinked edge tape is used versus straight edge tape." (credit: Ron Alexander) When working with composites, straight edge tape is primarily used. In fabric aircraft covering, pinked and straight tapes are used.
Per Vendor: We don't have one for this product because it is 100% polyester with no dye or finish (it is scoured to remove 99%+ of the processing chemicals used to weave it), but I will see what I can put together.
Yes, it is a polyester type like finishing tape used in fabric covering. It is used on experimental aircraft.
Yes, each size listed is sold in 50 yard rolls.
It is basically the 102 Dacron cut into a strip.