|Description||ID||Part No.||Dash No.||Price / Ft||Length||Buy|
|Ducting Vena HTD||5/8||05-30601||-2A||$8.65|| |
|Ducting Vena HTD||3/4||05-30602||-3||$5.75|| |
|Ducting Vena HTD||7/8||05-30603||-3A||$6.99|| |
|Ducting Vena HTD||1||05-30604||-4||$6.90|| |
|Ducting Vena HTD||1-1/4||05-30605||-5||$10.50|| |
|Ducting Vena HTD||1-1/2||05-30606||-6||$9.95|| |
|Ducting Vena HTD||1-3/4||05-30607||-7||$11.50|| |
|Ducting Vena HTD||2||05-30608||-8||$13.80|| |
|Ducting Vena HTD||2-1/4||05-30609||-9||$15.50|| |
|Ducting Vena HTD||2-1/2||05-30610||-10||$15.50|| |
|Ducting Vena HTD||2-3/4||05-30611||-11||$18.60|| |
|Ducting Vena HTD||3||05-30612||-12||$18.50|| |
|Ducting Vena HTD||3-1/4||05-30613||-13||$19.65|| |
|Ducting Vena HTD||3-1/2||05-30614||-14||$21.55|| |
|Ducting Vena HTD||3-3/4||05-30615||-15||$24.65|| |
|Ducting Vena HTD||4||05-30616||-16||$24.50|| |
|Ducting Vena HTD||4-1/2||05-30618||-18||$25.90|| |
|Ducting Vena HTD||5||05-30620||-20||$28.90|| |
|Ducting Vena HTD||6||05-30624||-24||$31.85|| |
Sold by the foot.
Flexible hose made of two layers of fiber glass and silicone coated with a non-visible steel wire inside the hose wall.
Recommended in gas conductions at high temperatures, engine exhaust fume extraction from a point immediately close to the ejection area and as protection of electric cables passing through extremely hot areas.
This product is manufactured with two fiber glass reinforcements with high temperature resistance silicone rubber. There is an inner steel wire inside the hose wall.
Operational temperature range from -55ºC (-67ºF) to +260ºC (+500ºF). It may reach up to 300ºC (+572ºF) during short periods of time.
Stock diameter listed in ordering grid. Diameters not listed are available as a special order in full lengths only. Full factory lengths are up to 13 ft. Varies by warehouse. For lengths over 13 ft, contact sales to confirm availability.
Fit perfectly. Good quality.
Exceeded my expectations. Much better than SCAT and well worth the added expense
Aircraft Spruce is a topnotch organization in my experience. Products are accurately represented, fairly priced, and shipped without delay. A highly satisfactory and recommended organization! Andy Anderson
I used this product to the replace the old broken ducting on my Porsche 911SC heat exchanger. Is was a perfect fit for my car.
Great substitute ducting for scat, the sceet with smooth bore giving a smoother airflow and stronger straighter installation.
Perfect replacement for a single wall SCAT tube used for a fuel injector air intake that had developed a tear.
Very durable and working great on my airplane
Outstanding service and quality of product many products offered that are not readily available elsewhere. Will definitely look here first for similar needs in the future.
Better than my original SCAT tubing. But it a little bit less flexible so order a bit long to allow for that. Worth it over the lesser quality tubing.
It was just as described and works great for my carb heat on my Hummel H5
The weight of this ducting is approximately 0.33 lbs / ft.
The material does not come with material analysis certification. You can request this information at the time of order. We receive this material with a certificate of conformance, the material analysis will need to be requested from the manufacturer, and they may charge for this accordingly.
The technical data sheet does not list the OD of this material, but it is approx. 1-1/8".