Duke & Skipper
Super, Sierra &
|4-172||Cessna 150, 152,|
172, 175, 177, 182,
|4-206||Cessna 205, 206 &|
177RG, 182RG, &
|4-SR||Cirrus SR 20 & 22||48 in|
American AA1 &
|4-Lake||Lake Amphibian||48 in|
|Mooney Aircraft||48 in|
PA-24, PA-30 &
PA-39 Also the
Cherokee Six axle
w/pants if tabes
above wheel are
|Piper PA-22, & PA-|
*handle extends to
|4-PA46||Piper Malibu &|
|Piper PA-28R, PA-|
32R, PA-46 Hand
|4-RVA||Vans - RV6A,|
RV7A, RV8A, &
|Socata Style Bogi|
|Navion Aircraft||48 in|
|Operation: Extend the handle easily with high-shear quick release pin. Apply forward pressure on the spreader bar to open the wishbone jaws. Line up Bogi-Bar attachments at the tow points or axle depending on model. Release the tension on the spreader bar and youre Locked-On! The tow bar will not slip off the plane. Reversal for removal. Extended, the Bogi-Bars are slightly over 4 feet long unless noted.|
This tow bar is absolutely fantastic! Money well spent. I had a spring mounted tow bar that came with my 182 when I bought it. The trouble with that one was it would pop open while I was pushing it.....like every time I used it. This tow bar locks into place and stays put. It is very solid. Very Pleased.
Not cheap by any means (what in aviation is!), but quality made. My only suggestion to the manufacturer is to put stops on the tube so that the hole at least self locates along the axis. As designed now, you have to align the holes in 2 directions (along axis and rotational). That is a pain. I leave it extended in the hangar, but break it down to stow in plane.
BOGERT 4-210 CESSNA TOWBAR +
I have a bush aircraft. Which of these towbars would be the closest to fit over 24cm (9,44inch). Then i could mod the rest
Well made and works great. Folds and fits well in baggage compartment
Just started using it but seems much more solid and well built than my original. Easy to use and store.
A must have for any aircraft. Takes up minimal space and is well made. Don’t fly without it!
Very high quality.
Great tow bar for the RV-6A.
Replaced stock towbar for C182 Q. It is long enough to clear prop and push /pull in a comfortable manner. Im 6ft 1 and Im not hunched over using this tool anymore
Great quality, works great.
This towbar, part # 13-04282, weighs 3.47 lbs.
It is 28.5" long when collapsed.
Use part # 13-21892 for the Bogi-Bar tow bar for the Navion.
Yes, this product fits the rv6a, rv7a, rv8a & rv9a and the rv12 with or without the wheel pants!
No. This does not have a clevis attachment.
This tow bar is for specific Beech aircraft with the stock sized tires, it is not likely that it would work with 29" tires.