PN | Cable | Sphere | Strength (Lbs.) |
---|---|---|---|
SA110-3 | 3/32 | .250 | 735 |
The BA3 Series of plain ball end fittings meet all requirements for Boeing’s BACT14B Plain Ball End Fittings and NAS494 series Plain Ball End Fittings. All balls are manufactured from stainless steel as specified in MIL-DTL 781 and are certified to the appropriate standard(s). |
To fit onto a wire cable the end must be perfect with no (zero) unraveling
Plain Ball Cable Term SA110-3
Product worked perfectly and was quite easy to install & crimp (as long as one uses the proper crimping tool.
Plain Ball Cable Term SA110-3
Worked as required
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This is minimum breaking strength in lbs that is the strength to the load on the cable before it slips or the cable breaks. P/N# SA110-2 is #385 of MIL-DTL-83420 Type 1 Composition A cable.