FREE SHIPPING ON ORDERS OVER $699 (SOME EXCLUSIONS APPLY) | 877-795-2278

GARMIN G3X LRU STANDARD KIT GSU 25C GMU 11 GTP 59 AND CONFIG MOD

$2485.00/Each
Part# 11-17305
MFR Model# K10-00016-14

Overview

To simplify and streamline your installation, these data modules are available in prepackaged G3X system sensor kits. Whether you select the standard or high-performance kit version (for aircraft capable of speeds in excess of 300 kts IAS), your package will include a GPS-aided digital ADAHRS (air data and attitude/heading reference system), a solid-state magnetometer, an outside air temperature (OAT) probe and a configuration module to provide your system with the information it needs.

    Digital ADAHRS
  • Leveraging sensor technology from our high-end glass flight deck systems, the GSU 25 ADAHRS unit is included in the standard kit, which provides highly accurate and reliable referencing of your aircraft position, rate, vector and accelera­tion data. The module takes up just a fraction of the space and weight previously required by conventional gyro-based instrument systems. In the high-performance kit, the GSU 25D ADAHRS unit offers the same functionality with processing appropriate to aircraft flying at indicated airspeeds above 300 knots.
    Magnetometer
  • Our GMU series of solid-state, triaxial magnetometers are remote-mounted devices that use magnetic field measurements to provide electronically stabilized heading data for flight instrumentation. The GMU 11 magnetometer is provided in the standard kit, while GMU 22 is provided in the high-performance kit.
    Temperature Probe
  • Included in both the standard and high-performance kits, GTP 59 is an OAT probe that provides data to the G3X system’s air data computer for true airspeed, density altitude and other essential flight calculations.
    Configuration Module
  • The G3X Touch system configuration module stores configuration and calibration data for the system.
    Smart Design, Simple Installation
  • Installation of G3X system sensors in your aircraft is simple and straightforward — with our standard mounting hardware available. For builders and installers who want to take the guesswork out of cockpit modernization, these bundled sensor kits can help make quick work of putting it all together.

In The Box

    Standard Kit:
  • GSU 25C ADAHRS
  • GMU 11 Digital Magnetometer
  • GTP 59 Temperature Probe
  • Configuration Module
  • GSU 25C and GMU 11 Install Kits Not Included
    High Performance Kit:
  • GSU 25D High-Performance ADAHRS
  • GMU 22 Digital Magnetometer
  • GTP 59 Temperature Probe
  • Configuration Module
  • GSU 25D and GMU 22 Install Kits Not Included
  • Frequently Purchased With
  • Customers Also Viewed

Reviews

Magaero L Verified Purchase

GARMIN G3X LRU STANDARD KIT GSU 25C GMU 11 GTP 59 AND CONFIG MOD

April 22, 2023

Good product and good service

Paul G Verified Purchase

GARMIN G3X LRU STANDARD KIT GSU 25C GMU 11 GTP 59 AND CONFIG MOD

November 10, 2022

Lucas S
August 7, 2018

The only reason I didn’t give this probe 5 stars was that I had to wait over 2 weeks for it to arrive...

Douglas W
October 5, 2020

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: I have a G3X installed and I know that the G3X touch and the plain G3X system cannot comunicate but is there a way that I can use my plain GDU as just a GPS and then I connect the touch up with my excisting module's?

You would have to run the GDU 370/375 completely separate with its own GPS signal and rewire the G3X touch to be the main display with your existing LRUs.

Q: For the Garmin G3X EFIS, do I have to buy the Connector Kits if I buy the Harness kit?

Yes, you would still need to purchase the connector kit in addition to the harness.

Q: What additional connector kits and/or harnesses are needed with K10-00016-40 (single display, no EiS, no XM).

You would need the GDU 460/465 Install Kit (11-12646), GSU 25 Connector Kit (11-11433), and the GMU 22 Install Kit (11-12213).

Q: What wiring is included in the G3X VFR Harness EFIS/EMS 4CYL CON/LYC?

For the VFR harness all of the components including the engine leads are included minus connection to an auto pilot and audio panel (which have there own part numbers on our list). When ordering a G3X system, we will send you a worksheet to fill out for your unique setup.

Q: What is included in the G3X VFR EFIS?EMS harness?

As each G3X harness we create is unique, there is a form that you would fill out which will includes the features you want including and pricing.

Q: What is the difference in 11-11433 and 11-15303?

11-11433 is the GSU 25 connector kit by itself. Part # 11-15303 is the GSU 25 connector kit with a custom harness.

Q: This page is for the G3X but the only available items here are G3X Touch. Does that mean that the non touch version is no longer available?

The non-touch screens are no longer available. We only offer the touch screen G3X now.

Q: With the GTR 20 there is a 2 place intercom, I have a 4 place airplane, what I have to do to have intercom with the 2 extra places?

You will need to purchase a GMA 245 audio panel or 245R remote audio panel to support a 4 place aircraft.

Q: Regarding the Garmin G3X EFIS: can you display twin engine data?

Per the manual, yes, the G3x can display twin engine data.

Q: What all is included with the dual 10" screen G3x touch with EIS? Are connector kits included?

Included: (2) 10" GDU 460, ADAHRS GSU 25, Magnetometer GMU 22, GEA 24, Temperature Probe GTP 59, Config Mod, w/sockets, Jackscrew. Connector kits are available but sold separately.