|4-inch||W40R||3/4" roller bearing||Goodyear/McCreary|
|5-inch||(Lancair) W50S||1-1/4" x 4.56" axle||Lamb|
|5-inch||(Vari-Eze) W50L||1-1/4" x 5.75" axle||Lamb|
|5-inch||W51S||1-1/4" x 4.75" axle||Goodyear/McCreary|
|5-inch||W51L (Mustang IIL)||1-1/4" x 5.75" axle||Goodyear/McCreary|
|5-inch||W51LT (High Perf. Cozy MkIV)||1-1/4" axle 3.084 bearing spc.||Goodyear/McCreary|
|6-inch||Falco W60 Requires tube w/bend||1-1/4" x 4.75"||Any|
|6-inch||Avid Flyer/Murphy Aviation W62 Req. tube w/bend||axle 3/4" roller bearing||Any|
|Matco Tube with 90° bend||-||Use with 06-02160 or 06-02110||-|
|6-inch Gold Ltwt.||External Caliper Brake||1-1/4" taper||600 x 6|
|5-inch||Berkut, LongEZ||1-1/4"||11.0 x 4.0-5|
|5-inch||W51LXT Glasair III||1-1/4"||500-5|
|6-inch||W600XT, Velocity, Seawind||1-1/2"||Any 6" Tire|
These custom-made, low-profile wheels with hydraulic brakes, are specially designed for light homebuilts. Wheels are cast using Almag 35 (MIL-A-10935, 36, 37), a high purity virgin magnesium-aluminum alloy.
All models are of the same basic design and all kits below include 2 wheels and 2 brakes, ready to install. Average weight is 5.75 lbs. per wheel and wheel width is 4.5".
Prices are per set (2 wheels, 2 brakes) Other suppliers offer them individually.
Is third time a charm? Ordered 1st time, UPS trashed the box, dropping it on a corner and denting, scratching and scarring the wheels, 2nd order came, packing in box so poor wheels were scratched and dented, 3rd time will deliver 3/7/18. Iam hoping for a good outcome. The packing from the manufacturer is sorely lacking in quantity and quality!
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.