Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devices as a turnbuckle fork, a clevis or a cable shackle. Manufactured and plated in same manner as AN3 - AN8 bolts . Minimum tensile strength 125, 000 PSI . Eye bolts will be furnished with either drilled or undrilled shank subject to stock on hand. Add letter "A" after dash number for undrilled shank.
Shank 3/8" Hole 3/8" Thread 3/8-24.
For "Undrilled" use "A" at end of part number.
exactly as described, great quality
EYE BOLT DRILLED AN46-15
upgrade to this stronger eybolt great for confidence ,wish options for link hole where possible.
EYE BOLT DRILLED AN46-25
Awesome product... understand about aircraft grade. But a little pricy.
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The hole has a diameter range between .375"-.378".
The nominal length is measured from the bottom of the head to the end of the bolt itself.