SAME DAY SHIPPING ON ORDERS PLACED BY 2 PM | 877-795-2278

6061T6 Tube 1X.049 - 1 Foot

$7.50/Each
Part# 03-36610-1
O.D.I.D.WallWt./Ft.
(lbs.)
Part No.
10.902.0490.175403-36610-1

Overview

If manufacturing test reports are required, there is a minimum $15.00 charge per order. Please indicate in the special instructions box at the time of order that certs are required.

* This item will be supplied as either .120 or .125.

Reviews

Ive been ordering 6061 tubing and round bars from Aircraft Spruce for a pretty long time. I use these to create lightsabers. Shipping is fast when the product is in stock and approx dates on back order are usually good. Customer service as been good when needed. I would not hesitate to recommend this supplier.

Jean-francois V
January 25, 2024

All of Aircraft Spruces tubing is high quality stuff. I buy 4130 and aluminum tubing from these guys. Really a good place to buy this type of material.

Rodney L
March 17, 2022

I bought these to replace my Yakima round roof rack crossbars which were steel and would invariably after 5-6 years have rust poking up through the vinyl coating and end plugs splitting because of the rust. These aluminum tubes are a perfect fit for the roof attachment bracket and the end plugs. I bought the 6 ft., 1.125 OD with 0.125 wall thickness.

Bill
April 28, 2021

I purchased aluminum pipes for a handmade antenna used for ham radio. It perfectly works for all including cost advantage. Thank you.

Ham R
April 5, 2021

exactly what I need fast service

Kerry G
March 29, 2021

As advertised

Lee W
February 18, 2021

Product was awesome!

John M
January 27, 2021

Tubes arrived as promised.

John T
January 20, 2021

Just what I ordered

Rodney M
January 5, 2021

Great price and has a local pickup. It worked perfectly for what I needed.

Keith H
December 28, 2020

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Is this seamless tubing?

Yes, this is seamless tubing.

Q: What is pressure rating for 3/16 - .035 wall 6061T6 aluminum tube? Part no. 03-00012

The tech data sheet does not list a pressure rating for this material. Barlow's Formula can be utilized with the applicable specifications to determine a theoretical bursting pressure.

Q: Hello, the * note at the bottom of the page indicates that the tubing supplied is .120 or .125. It would seem to indicate wall thickness. If I order 7/8 tubing with a wall thickness of .065 will I be receiving tubing with a wall thickness of .120 or .125 instead? Sorry but its a bit confusing as I don't see the * note next any in the listing and would think it applies to all. Thanks

The * note applies only to part number 03-37450. In your example, you would be receiving thickness of .065. Sorry for the confusion.

Q: What specs are listed on the test reports for this 6061T6 Round Aluminum Tubing?

The following specs are listed on the cert: AMS - WW - T - 700/6B; AMS 4082P; ASTM B 210-04.

Q: Is the price for each meter or foot?

The price shown in the price column is the price per foot. All of our metal tubing is priced and sold by the foot.

Q: Is the 6061T6 aluminum tubing coiled for shipping or straight?

6061T6 tubing cannot be coiled for shipping. All pieces must ship straight. We can cut to smaller lengths for shipping but cannot coil.

Q: Your lengths for 6061-T6 appear to be limited to 12ft. Is it possible to buy slightly longer?

No, 12 feet is the standard mill length for 6061 material.

Q: Is the 6061-T6 tube drawn or extruded?

It is drawn seamless tubing.

Q: Can the tube be bent?

This is not a soft aluminum. If it needs to be bent, it is possible but would require a specialty metal bending tool.

Q: What is the longest length 6061-T6 round or square tube that can be shipped?

Full lengths are 13 ft of this material, however, at this length it will need to ship via UPS Freight.

View in Catalog

View Image View in Catalog