SAME DAY SHIPPING ON ORDERS PLACED BY 2 PM | 877-795-2278

Laversab RVSM Automated Pitot Static Tester - All Aircraft

The Model 6270 is used to perform leak-checks and accuracy checks on the Pitot Static systems of RVSM aircraft. Accuracy checks are typically performed on altimeters, airspeed indicators and VSI’s. The high accuracy of the Static output is fully compliant with RVSM requirements. The Model 6270 is equipped with a Remote unit which has a large sun light-readable display and touch-screen. A redundant keypad is also included. An internal battery (optional) makes the tester completely portable. The wide operating temperature (optional) makes it usable in any environment. The “Profiles” feature makes it very easy to use. Calibration is required only once a year. The 6270 is also WiFi-enabled. With these distinctive features, the Model 6270 is the ideal Pitot Static tester for RVSM-compliant aircraft.

Part #12-04749
CALL FOR PRICING
Call (877)477-7823

FEATURES


Automated operation (at an Affordable price) Simply enter the target set-points for altitude and airspeed and the unit automatically achieves the targets, ramping at the programmed rates. Control at the set-point is stable within ± 1 foot and ± 0.1 knot. This RVSM tester’s low price makes it very affordable
Calibration period: 1 year
Programmable limits User-programmable limits for altitude, airspeed, Mach, VSI and airspeed-rate provide protection to the aircraft.
Negative-airspeed protection An internal differential-pressure relief valve provides protection against negative airspeed.
Internal Battery (Optional) The internal battery allows for 8 hours of continuous operation. Re-charge time is only 8 hours.
Low-temperature operation (optional) With optional internal heaters, the unit can be operated down to -40°C
"Jog" and "Hold" features Set-points can be “jogged” up or down in small increments. Ramping to a set-point can be put on “hold” and controlled at the current measured value.
"Ground" feature Brings Pitot and Static outputs to ambient “ground” pressure after completing a test. Ambient pressure is constantly monitored.
"Profiles" feature A profile of set-points can be downloaded from a PC, allowing the user to step through the set-points using a single key. Each profile can have up to 50 set-points and 15 profiles can be stored in the unit.
Leak checks Pitot and Static leak-checks can be performed either independently or simultaneously. Three leak-timers can be programmed to perform timed leaks between 1 to 20 minutes. The display of “instant” leak rates provides immediate feedback to the user.
Pressure & Vacuum source Built-in diaphragm pumps provide the pressure and vacuum source for the unit.
Remote unit The Remote unit is the operator interface for the tester. It features a sunlight-readable 5.8” color display, a back-lit keypad and a touch-screen (which can be disabled). All operations are performed from a single screen which displays all pertinent parameters.
Manual Vent Valves On loss of power, the unit maintains pressure (except for leaks). The unit can be manually vented to “Ground” at a controlled rate using precision metering valves


SPECIFICATIONS


Static Output
Pressure function
Range:
Resolution:
Accuracy:
Units:
1 to 32 inHg
0.001 inHg
±0.003 inHg
inHG, mbar, psi, mmHG, kpa

Pressure Rate
Range:
Resolution:
Accuracy:
Units:
0 to 30 inHg/min
0.001 inHg/min
±1% of rate
pressure-units/min

Altitude function
Range:
Resolution:
Accuracy:
-2000 ft. to 50,000 ft.
1 foot
± 3 ft. @ 0 ft.
± 4 ft. @ 10,000 ft.
± 6 ft. @ 20,000 ft.
± 9 ft. @ 35,000 ft.
± 18 ft. @ 50,000 ft.
Units: Feet, Meters

Altitude Rate function
Range:
Resolution:
Accuracy:
Units:
0 ft/min to ±15,000 ft/min
1 ft/min
±1% of rate of climb
Feet/min, Meters/sec

Pitot Output
Pressure function
Range:
Resolution:
Accuracy:
Pt units:
Qc units:
0 to 30 inHg (differential)
0.001 inHg
±0.003 inHg
inHg, mbar, psi, mmHg, kpa, EPR
inHg, mbar, psi, mmHg, kpa

Pressure Rate
Range:
Resolution:
Accuracy:
Units:
0 to 30 inHg/min
0.001 inHg/min
±1% of rate
pressure-units/min (EPR in inHg/min)

Airspeed function
Range:
Resolution:
Accuracy:
0 to 650 knots
0.1 knots
± 1.0 knots @ 20 knots
± 0.3 knots @ 50 knots
± 0.2 knots @ 100 knots
± 0.1 knots @ 200 knots
± 0.04 knots @ 500 knots
Units: knots, Mach, km/hr, mph

Airspeed Rate
Range:
Resolution:
Accuracy:
Units:
0 to 500 knots/min
0.1 knots/min (0.01 km/hr/sec)
±2% of rate
knots/min, km/hr/sec, mph/min

Mach function
Range:
Resolution:
Accuracy:
0.0 to 3.0 Mach
0.001 Mach
±0.001 above 0.2 Mach

Power requirement
90-260 VAC, 47-440 Hz, 100 W (200 W with heaters)
Optional Internal Battery: 8 hours of operation

External Interfaces
WiFi, RS232 Serial ; Encoder optional

Dimensions & weights
Main unit:
Remote unit:
22” x 14” x 9” / 34 lbs
6” x 6” x 1” / 1.8 lb.

Environmental specs
Operating temp.
Storage temp.
Humidity:
0°C to 50°C, –40°C to 50°C (optional)
–40°C to 75°C
5 to 100%