THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-795-2278
Thumbs 1
Thumbs 1
Thumbs 1
Thumbs 1

RAM Ez-Roll'R Holder For iPad 5th / 6th Gen / Air / Air 2 / Pro 9.7 Without Case

$32.65/Each
Quantity
Add to Wishlist
Part# 11-12358
MFR Model# RAM-HOL-AP17U

Overview

Compatibility: Fits full size iPad 5th Generation, 6th Generation, Air, Air 2, Pro 9.7.

IMPORTANT: Does NOT fit Apple iPad Air 5 (2022 Model). For the iPad Air 5, see part # 11-17593. Does NOT fit iPad Mini models.


EZ-ROLL'R™ Cradle is not a complete mounting solution, but contains hardware to attach to any RAM mount that contains the universal AMPs hole pattern.

EZ-ROLL'R™ Cradle consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad Air, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad Air and become the most useful accessory in your vehicle.

Made of: High Strength Composite

Features

  • The RAM® EZ-Roll’r™ cradle for the iPad (5th Gen), iPad (6th Gen), iPad Air 1-2, and the iPad Pro 9.7 secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™ cradle also features two attachment points on the back to attach a RAM® round ball base.

Specifications

  • Includes (4) #8-32 x 5/8" Machine Screws & (4) #8-32 Nylock Nuts
  • Hole Pattern: 4-Hole AMPS 1.181" x 1.496"
  • Material: High strength composite
  • Docking Cradle: No
  • Locking Cradle: No
  • Fit's iPads WITH Cases: No
  • Fit's iPads WITHOUT Cases: Yes
  • Low Vibration Environment: Yes
  • High Vibration Environment: Yes

Compatbility

  • iPad Pro 9.7
  • iPad (5th Generation)
  • iPad (6th Generation)
  • Air 2
  • Air

Reviews

Rodger P Verified Purchase

RAM Cradle For iPad Air 1/2/Pro 9.7/5Th Gen/6Th Gen

August 17, 2024

Best holder I could find for my iPad!

Lloyd M Verified Purchase

RAM Cradle For iPad Air 1/2/Pro 9.7/5Th Gen/6Th Gen

October 10, 2023

Kevin C Verified Purchase

RAM Cradle For iPad Air 1/2/Pro 9.7/5Th Gen/6Th Gen

June 2, 2023

Pierre G Verified Purchase

RAM Cradle For iPad Air 1/2/Pro 9.7/5Th Gen/6Th Gen

May 3, 2023

Well made and fits like a glove.

Baris M Verified Purchase

RAM Cradle For iPad Air 1/2/Pro 9.7/5Th Gen/6Th Gen

September 18, 2022

Excellent. Happy I bought the suction cup style. Advise, build it on RAMs website, order it here as ACSs shipping will make it cheaper here.

Dan K Verified Purchase

RAM Cradle For iPad Air 1/2/Pro 9.7/5Th Gen/6Th Gen

May 5, 2022

Apple dosent make it easy to find a product that will be correct but Spruce did

Richard I Verified Purchase

RAM Cradle For iPad Air 1/2/Pro 9.7/5Th Gen/6Th Gen

August 10, 2021

Works perfectly for my 5th generation iPad. Just switched it out for my older one on my Ram systems and it let me use my newer iPad, with upgraded Foreflight

Phil S
November 30, 2020

Extremely reliable component from a trusted manufacturer.

Yurii K
December 18, 2019

Works great. Very sturdy.

Charles W
June 13, 2019

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Will this work for an iPad Air 2?

Yes, part # 11-12358 will work on both original iPad Air and the iPad Air 2 without a case or sleeve.

Q: Will this part # 11-12358 work with the new iPad Pro 9.7?

Yes, this fits the iPad Pro 9.7.

Q: Part 11-14777 is for the iPad Pro 12.9. I am looking for one that works for the smaller iPad Pro 9.7. What part # should I use?

Part # 11-12358 fits the iPad Air 1/2 and the iPad Pro 9.7.

Q: Is this the mount for the 2017 5th gen with 9.7 in screen too?

Yes, this is the cradle for the iPad Pro 9.7 inch.

Q: The 5th Gen IPad 9.7 is not the same exact product as the IPad Pro 9.7 (which has been discontinued by the way). Does this RAM EZ-Roll'r holder (part # 11-12358) fit the 5th gen IPad 9.7 Aka model: A1823?

Yes this will fit the 5th generation iPad 9.7 as well as the iPad Pro 9.7 as long as it doesn't have a case.

Q: What other part numbers do I need to make a yoke mount kit?

For a standard yoke kit, you would need this cradle plus part #'s 11-07069, 11-01255, and 11-12930. You can use our RAM Builder to choose which style and sizes you want for the yoke mount and arm length. The ones we listed are the most popular. To access our RAM Mount Builder, just keyword search "ram build" on our website and click the first result.

Q: Can you make the following Ram part available RAM-HOL-TAB26U? No compatible iPad gen 7 cradles are available on your site.

We have added the RAM-HOL-TAB26U to the website. Please search for part # 11-17908.

Q: Will this work with a model a1458 ipad?

No, for your iPad you need 11-08577.

Q: want to use I pad holder part Part# 11-12358 with a suction mount on the left side of the window so I can turn and view it in left pilot seat, what additional parts do i need.

For a standard suction kit, you would need this cradle plus part #'s 11-07069, 11-01255, and 11-06449. You can use our RAM Builder to choose which style and sizes you want for the yoke mount and arm length. The ones we listed are the most popular. To access our RAM Mount Builder, just keyword search "ram build" on our website and click the first result.

Q: Does this case work with Samsung Galaxy TabS2?

We recommend our part number 11-11239 for tablets like the Galaxy S2.

View in Catalog

View Image View in Catalog