Adjustable plastic ventilators for use as fresh air intakes or air exhausts. Easily installed in plastic windshield or metal cowling.
Model CC3251: Mounts 3-1/4 diameter opening. Rotates to provide any degree of ventilation. Retracts to a closed position nearly flush with the mounting surface.
Super service in product and delivery, both time and wrapping.
they work great! you may have to sand the whole bigger but they work great!
Just as ordered thanks
Nice addition to my fox
3rd order,using these in my utv . needed more air movement
Use this in my center console boat with a full windshield. Works great when it rains, but there is no air movement behind it. The windshield thickness was greater than the notch for the snapvent, so had to increase it with a dremel tool. Works very well and can close them when it rains. Well worth the price!
Works very well. I made a test hole in a piece of scrap sheet metal first. The instructions which came with it were not complete. I had to go to the website to get the complete instructions . Went very well.
Great product - Forced air into the cock pit making the area cooler and more comfortable for long flights. Aircraft Spruce gave excellent service and fast delivery.
I installed the vents in my doors using the recommended hole saw after sanding the edges with sandpaper they snapped right into place very satisfied with them
I would recommend 3-1/8” hole saw and use a dremel tool with the sanding wheel to get to 3-1/4” opening and keep testing it. My 3-1/4” hole saw actually made it to big and had to glue a piece on each side to make it work.
Yes, we have added a PDF to the "Documents" tab of this web page with the installation instructions.
There is no mounting hardware required for installation of these snap vents. In the box there is only the pair of vents along with installation instructions. A copy of the install instructions can be found in PDF form in the "Documents" tab of this web page.
This vent an be used with up to 7/32" thick windows.
Yes, these are priced and sold in pairs.