Other Customers
Have Also Viewed:
Have Also Viewed:
VENA MTD (CEET EQUIVALENT) FLEXIBLE AIRCRAFT DUCTING - CUT TO LENGTH
|
Description | ID | PN | Dash No. | Price / Ft | Length | Buy | Sub-Total |
Ducting Vena MTD | 5/8 | 05-30501 | -2A | $9.50 | |||
Ducting Vena MTD | 3/4 | 05-30502 | -3 | $5.45 | |||
Ducting Vena MTD | 7/8 | 05-30503 | -3A | $6.50 | |||
Ducting Vena MTD | 1 | 05-30504 | -4 | $6.50 | |||
Ducting Vena MTD | 1-1/4 | 05-30505 | -5 | $6.50 | |||
Ducting Vena MTD | 1-1/2 | 05-30506 | -6 | $7.50 | |||
Ducting Vena MTD | 1-3/4 | 05-30507 | -7 | $8.50 | |||
Ducting Vena MTD | 2 | 05-30508 | -8 | $9.50 | |||
Ducting Vena MTD | 2-1/4 | 05-30509 | -9 | $10.50 | |||
Ducting Vena MTD | 2-1/2 | 05-30510 | -10 | $10.50 | |||
Ducting Vena MTD | 2-3/4 | 05-30511 | -11 | $11.85 | |||
Ducting Vena MTD | 3 | 05-30512 | -12 | $12.50 | |||
Ducting Vena MTD | 3-1/4 | 05-30513 | -13 | $13.50 | |||
Ducting Vena MTD | 3-1/2 | 05-30514 | -14 | $14.60 | |||
Ducting Vena MTD | 3-3/4 | 05-30515 | -15 | $14.60 | |||
Ducting Vena MTD | 4 | 05-30516 | -16 | $15.99 | |||
Ducting Vena MTD | 4-1/2 | 05-30518 | -18 | $15.99 | |||
Ducting Vena MTD | 5 | 05-30520 | -20 | $18.80 | |||
Ducting Vena MTD | 6 | 05-30524 | -24 | $20.50 | |||
Current Total
|
Choose the length of each piece from the Length column.
Click Add to Cart to add them to your shopping cart
or Add to Wishlist to store them for ordering later.
Click Add to Cart to add them to your shopping cart
or Add to Wishlist to store them for ordering later.
Sold by the foot.Ducting used to convey air or gaseous fluids at medium temperatures and with high resistance to aging. Vena® MTD is manufactured with two fiber glass textile reinforcements and it is covered with black neoprene rubber compound and coated with non-visible steel wire. These hoses have excellent flexibility and excellent aging resistance. ApplicationsThese hoses are specially recommended in gas conduction at medium temperatures.
ConstructionThis product is manufactured with two fiber glass textile reinforcements covered with neoprene rubber compound in black and coated with non-visible steel wire. TemperatureOperational temperature range from -55ºC (-67ºF) to +125ºC (257ºF). It may reach up to 150ºC (302ºF) during short periods of time. Certifications
Available SizesStock diameter listed in ordering grid. Diameters not listed are available as a special order in full lengths only. Full factory lengths are up to 13 ft. Varies by warehouse. For lengths over 13 ft, contact sales to confirm availability. |
- Tech Data Sheet (PDF)

![]() ![]() ![]() ![]() ![]()
|
Nice upgrade from original CAT ducting on a PA 28-181. |
![]() ![]() ![]() ![]() ![]()
|
very nicely designed and manufactured product.I am going to use it for air routing on my 93 cars intake , I will tell others that are interested in it where I got it.Pilot Shop rules the day! |
![]() ![]() ![]() ![]() ![]()
|
I used this as the air tube for my Ural motorcycle. I used the 2 pipe. Pretty easy to cut I set it perpendicular to a seam in my garage floor and used my Dremel to make a straight cut on both sides. Took about 9 for each side. It looks awesome and seals better than the original pipes |
![]() ![]() ![]() ![]() ![]()
|
The duct material was very stiff and difficult to manipulate in tight quarters. |
![]() ![]() ![]() ![]() ![]()
|
Exactly as ordered. Item was shipped promptly. Ordered by phone - friendly phone service. Keep up the good work! |
![]() ![]() ![]() ![]() ![]()
|
excellant quality |
![]() ![]() ![]() ![]() ![]()
|
I give the quality of the product a 5 Star.... But the ordering on line is a little confusing on the site. I ordered one piece pf duct tubing, 3 in length.... But I was shipped three individual 1 lengths. When I contacted a sales rep about it they explained why and thats what I ordered. Again somewhat confusing on line when you place the order for this product. I was given the option to return the items but just decided to sleeve the pieces back together since it was just a duct for a windshield defroster vent and I didnt want to wait to finish the repair. |
![]() ![]() ![]() ![]() ![]()
|
Yet to be installed. Appears to be what was ordered. |

I need 41 inches of 3 inch (i.d.) CEET ducting. I assume I need to order 4 'units' of tubing which would give me 48 continuous inches. Is this correct?
That is correct. It is sold per foot, in whole units. So you need quantity 4 for 48 continuous inches, then cut off 7 inches once you get it.
The description table gives only one internal dimension for a duct with an oval cross-section. Is the given ID the longest dimension of the oval or the shortest dimension? For example, for CEET ducting with an oval cross-section of 3.2 by 1.7 should I order 05-30513 or 05-30507?
CEET material is round not oval. Order using the I.D. of the unit.
Part Number | Description | Price | ||
![]() |
05-29801 | CAT-2A DUCTING 5/8" | N/A | Click here for details |
![]() |
05-29802 | CAT-3 DUCTING 3/4" | N/A | Click here for details |
![]() |
05-29803 | CAT-3A DUCTING 7/8" | N/A | Click here for details |
![]() |
05-29804 | CAT-4 DUCTING 1" | N/A | Click here for details |
![]() |
05-29805 | CAT-5 DUCTING 1 1/4" | N/A | Click here for details |
![]() |
05-30601 | SCEET-2A DUCTING 5/8" | N/A | Click here for details |
![]() |
05-30602 | SCEET-3 DUCTING 3/4" | N/A | Click here for details |
![]() |
05-30603 | SCEET-3A DUCTING 7/8" | N/A | Click here for details |
![]() |
05-30604 | SCEET-4 DUCTING 1" | N/A | Click here for details |
![]() |
05-30605 | SCEET-5 DUCTING 1 1/4" | N/A | Click here for details |
![]() |
05-30606 | SCEET-6 DUCTING 1 1/2" | N/A | Click here for details |
![]() |
05-30608 | SCEET-8 DUCTING 2" | N/A | Click here for details |
![]() |
05-30609 | SCEET-9 DUCTING 2 1/4" | N/A | Click here for details |
![]() |
05-30610 | SCEET-10 DUCTING 2 1/2" | N/A | Click here for details |
![]() |
05-30611 | SCEET-11 DUCTING 2 3/4" | N/A | Click here for details |
![]() |
05-30612 | SCEET-12 DUCTING 3" | N/A | Click here for details |
![]() |
05-30613 | SCEET-13 DUCTING 3-1/4" | N/A | Click here for details |
![]() |
05-30614 | SCEET-14 DUCTING 3 1/2" | N/A | Click here for details |
![]() |
05-30615 | SCEET-15 DUCTING 3 3/4 | N/A | Click here for details |
![]() |
05-30616 | SCEET-16 DUCTING 4" | N/A | Click here for details |
![]() |
05-30618 | SCEET-18 DUCTING 4 1/2" | N/A | Click here for details |
![]() |
05-30620 | SCEET-20 DUCTING 5" | N/A | Click here for details |
![]() |
05-30624 | SCEET-24 DUCTING 6" | N/A | Click here for details |
![]() |
05-29901 | SCAT-2A DUCTING 5/8" | N/A | Click here for details |
![]() |
05-29902 | SCAT-3 DUCTING 3/4" | N/A | Click here for details |
![]() |
05-29903 | SCAT-3A DUCTING 7/8 | N/A | Click here for details |
![]() |
05-29904 | SCAT-4 DUCTING 1" | N/A | Click here for details |
![]() |
05-29905 | SCAT-5 DUCTING 1 1/4" | N/A | Click here for details |
![]() |
05-29906 | SCAT-6 DUCTING 1 1/2" | N/A | Click here for details |
![]() |
05-29908 | SCAT-8 DUCTING 2" | N/A | Click here for details |
![]() |
05-29909 | SCAT-9 DUCTING 2 1/4" | N/A | Click here for details |
![]() |
05-29910 | SCAT-10 DUCTING 2 1/2" | N/A | Click here for details |
![]() |
05-29911 | SCAT-11 DUCTING 2 3/4" | N/A | Click here for details |
![]() |
05-29912 | SCAT-12 3" DUCTING | N/A | Click here for details |
![]() |
05-29913 | SCAT-13 DUCTING 3 1/4" | N/A | Click here for details |
![]() |
05-29914 | SCAT-14 DUCTING 3 1/2" | N/A | Click here for details |
![]() |
05-29915 | SCAT-15 DUCTING 3 3/4" | N/A | Click here for details |
![]() |
05-29916 | SCAT-16 DUCTING 4" | N/A | Click here for details |
![]() |
05-29918 | SCAT-18 DUCTING 4-1/2" | N/A | Click here for details |
![]() |
05-29920 | SCAT-20 DUCTING 5" | N/A | Click here for details |
![]() |
05-29924 | SCAT-24 DUCTING 6" | N/A | Click here for details |
Newsletters