THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-795-2278
Thumbs 1
Thumbs 1

H45 PVC FOAM 3/4"X32"X48"

$123.95/Each
Part# 01-12700
MFR Model# 15+SH
Foam
Type
DensityTkns.Sheet SizePN
Divinycell (PVC)
Type H45
3 Lb/Cu. Ft.3/4"32" x 48"01-12700

Overview

Divinycell:
    A closed cell medium to high density foam which has high compression strength, durability, and excellent fire resistance. Divinycell can be vacuum formed to compound shapes and can be bent using heat. Compatible with polyester, vinylester, and epoxy resins.

Reviews

Frank M Verified Purchase

H45 PVC FOAM 3/4"X32"X48"

September 6, 2023

Product is good quality, well packaged with no damage. Origionally had problems but customer service fixed everything.

Barry B Verified Purchase

H45 PVC FOAM 3/4"X32"X48"

August 9, 2023

The foam was exactly what I ordered, PVC foam with is fuel resistant and the material specified for building the strakes/fuel tanks for the Cozy MK IV. The foam was packed extremely well with wood to prevent damage. Aircraft Spruce always does a good job packing items to prevent damage in shipment.

David S
May 10, 2021

Divinycell Foam...just what the doctor ordered. I am using this foam to fair the ends of my horizontal stabilizer and the vertical stab and rudder as well. Easy to shape, loves epoxy and very light.

Clark H
November 15, 2019

Fast shipping

Mike
April 5, 2018

What can I say... Its Divinycell. My comment goes to the excellent person who took my phone order for his clear instructions to the packing/shipping person, and to him/her that executed flawlessly for the long trip to Panama. The foam arrived quickly and undamaged, due to the excellent packing! Thanks!

Patrick F
November 2, 2017

This should work out fine for my application.

Bob C
August 27, 2020

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Is this foam good for building bulk heads and instrument panels on a long ez? The plans I have call for R-45 foam. Is this the same stuff?

H45 foam core can be used in place of R45 foam, but any changes of the plans should be reviewed with other builders.

Q: Is this Divinycell Foam PVC sandable?

Yes, Divinycell can be cut and sanded to shape.

Q: Can this foam be cut with a hot wire?

No, Divinycell is not to be cut with a hot wire. The only foam that we offer that can be cut with a hot wire is our styrofoam, small cell (example part # 01-09400) and large cell (example part # 01-37600).

Q: Can the Divinycell foam PVC be purchased in longer lengths above 48"?

The sizes we offer are stock sizes with max length of 48". We may be able to special order a custom size, but the minimum order may be 20 pieces or more. We would just need the exact material and size you need and we can submit a request for a quote. Please contact our sales department if you would like to look into a special order for custom sizes.

Q: Can Divinycell be vacuum bagged, or will the heat of the epoxy cure cause it to melt or deform?

Divinycell foam can be vacuum bagged. Polyester, vinyl-ester and epoxies can be used on this foam without any damage to the foam.

Q: Can divinycell foam be covered with prepreg carbon fiber, vacuum bagged and put in oven at 350 degrees?

The heat distortion temp is 250 degrees. 350 degrees is much higher and would most likely damage the foam.

Q: Can this Divinycell foam PVC be cut using a CNC machine?

Yes. It can be cut using a CNC.

Q: I purchased a sheet of H45 Divinycell. I wish to glue it together, what epoxy, adhesive do i use. Thank you

There is not a specific epoxy adhesive to be used on this material. All the epoxy adhesives we offer would work fine. You may want to consult with others with the same project to see what others have used with success. T-88, G-Flex, Aeropoxy adhesives, are just a few we offer.

Q: Can the H45 foam in 1/8 and 1/4 thickness be rolled for shipping?

No, these are rigid and will break if we try to roll them.

Q: Is Divinycell foam compatible with avgas and/or motor gas?

This has passed the test of being submerged in High Octane Petroleum Spirit for 14 days.

View in Catalog

View Image View in Catalog