They are round on top and pointy on the bottom. Yes, I purchased some structural screws! Remember: you’ll need a bag per wing and don’t look for the ones that go around the fuel cap. You’ll need to order those separately. I could go into the dissertation about how things in aviation cost more than they should… But the quality here was good, and it was “expected pricing” when considering it goes on an airplane

Don W Verified Purchase

SS SCREW KIT FL TK 150/152

These screws will save grief and hundreds of dollars over fighting rusty originals, and will retain their strength.

Came as described. Needs an option for the long range tanks or at least a note telling you to order two kits if you have the big tanks

Just what I wanted A++++

Better than factory new!

Screws were sorted and the correct length to install standard wing tank.

Ordered these screws for my 1968 Piper Cherokee. These appear to be an exact replacement for my existing screws which were worn out/stripped. One thing that I noticed is if not applying ample pressure during installation the phillips head could get malformed/stripped just like my original screws. NOTE: The UPS delivery guy accidentally shipped product to my neighbor and I did not get my package right away. Aircraft Spruce made it right and promptly shipped another order free of charge. Thanks Guys for acting so quickly and resolving the issue!

Fits perfectly. Just note that the structural fuel tank screw kit only provided enough screws for one tank. To do both sides you will not another kit

They appear to be an exact replacement for my old corroded screws. Great service and fast shipping from Spruce as usual. I looked before ordering and the Spruce information said the kits were sold by the tank. I needed to replace both tanks so I ordered 2 sets. I was shipped enough screws for 4 tanks. I returned the excess and got a credit but was out the return shipping cost. Im not sure who was wrong, the website or shipping department. Suggest you check before ordering.

The screws were correct for the fuel panel cover. However, they were not shiny like the other stainless screws located throughout the airframe exterior. These were more of a gray colored screw that other stainless screws I have purchased for my aircraft. Luckily, I was able to paint over them to match the other wing.

Matt G Verified Purchase

SS SCREW KIT FL TK 172

Purchased for a cessna 150. Note. This kit is for ONE tank, and does not include the screws that go around the filler neck. So for 30 sum odd bucks you get a handful of tank cover screws. The cad plated ones lasted 40 years, so thats what will go back on there next time. And do the kit yourself from the parts manual and actually get what you need.

I have ordered two kits for two different 150s with the same result. The number of screws may be correct, however the type of screw is not. The end result is you end up using old screws or ordering more.

Got the C150 standard range kit. Was short by about 13 screws. On the other tank cover when the time comes I’ll just buy the screws myself and make my own kit.

So I bought these figuring theyd be shiny SST like the exterior non structural ones I also purchased... Wrong! Most of these in this SK172Fuel kit are dull gray looking and not shiny SST as expected... So the only thing your getting over the non SST structural ones is that these are SST... To me, not worth it since new non SST ones will last years w/o corrosion...