Aircraft Spruce Canada
Brantford, ON Canada
Corona, CA | Peachtree City, GA
Chicago, IL | Wasilla, AK
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
A-1760 Vans RVCustom Control Cable
MFR Model# VANS A-1760
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
Overview
|
Specify knob color (black, blue, red), overall length of control (from under panel nut to end of control) and stroke (2-1/4-Inch, 2-1/2-Inch). Made in USA |
Q&A
Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The ACS A-1760 control has 3/4-16 mounting threads at the panel. A 3/4" hole would be required to install.
Please see part numbers 05-02633 and 05-02634.
This cable has a bulkhead fitting at the threaded end to secure the housing. The end user would normally fabricate a bracket for their specific application.
The crimped bulkhead threads are 7/16"-20 and 1-1/2" long. You could drill a 7/16" hole in your fabricated bracket for it to be attached.
Yes, this display picture is accurate and is up to date.
This cable has the nuts and washers at the bulkhead end of the cable.
With the control pushed in, measure from the end of the 10-32 threads, to the flat part of the control that sits flush with the panel when mounted.
The firewall fitting (bulkhead fitting) is 7/16-20. Standard lead time is 4 weeks ARO.
After the nut there is a .50 inch metal sleeve and after that it drops to the cable which is .25 inch.
This cable does not use the 10464 it has a threaded bulkhead instead of the grove for the 10464 clamp. There are are also 2 stroke options so it depends on what option you pick.
