SAME DAY SHIPPING ON ORDERS PLACED BY 2 PM | 877-795-2278

Shielded Ignition Harnesses - For Slick Mags

From $295.95 to $409.00
Engine/Magneto Manufacturer PN PN Price Buy
Cont. 0-200 (1780), C-75 (1780), C-85 (1780), C-90 (1780)12304-31
08-17285
$310.00
Quantity
VW (M2266)12304-32
08-17286
$295.95
Quantity
Lyc 0-235 (M2363), 0-290 (M2363), 0-320, 0-360 (M2363)12304-33
08-17287
$295.95
Quantity
LYC-O-54012304-34
08-17079
$409.00
Quantity
Subtotal $0.00
Add to Wishlist

Overview

Note: 12304-32 1 Mag Cap with 4 Leads per order (see Image 1). 12304-33 and 123404-31 are sold as a set, 2 mag caps with leads. Will fit 5/8" spark plugs only.

Ignition harnesses late type 5MM wire constructed of 16 strands of tightly braided copper wire impregnated with scuff resistant white silicone. All strands must fracture before a complete open circuit type failure occurs thus extending lead life. Lead flexibility is retained from -65° to 400°F. Moisture & cleaning solvent penetration is eliminated by the impregnated silicone coating.

This extremely flexible wire lends itself to sharp bends thereby eliminating the need for old style harness elbows. No soldered joints in the grounding circuit. Custom made for most 4 & 6 cylinder engines using Bendix or Eisemann magnetos and 4 cylinder engines using Slick magnetos.Cable outlet plates are not furnished for Bendix & Eisemann mags as these are already installed on the magnetos in service. They must be purchased separately for new magneto installations. Harnesses for Slick magnetos are furnished with the backplates installed. Standard harnesses for the Bendix S4/S6 mags are fitted with a male nut which screws into the threaded outlet plate on the back of the mag. Harnesses for old style Bendix SF4 and SF6 magnetos are fitted with female nuts.

ACS Products ignition harnesses can be used on experimental aircraft or on certified aircraft with field approval (FAA Form 337). If FAA/PMA harness is mandatory or if for use with 3/4" spark plugs, use Slick Bendix, Aero-Lite or Champion harnesses.

Made in USA

Eligibility

Engine/Magneto Part No.
VW (M2266) * 12304-32
Lyc 0-235   (M2363) 12304-33
0-290 (M2363) 12304-33
0-320,0-360   (M2363) 12304-33
Cont. 0-200   (1780) 12304-31
C-75 (1780) 12304-31
C-85 (1780) 12304-31
C-90 (1780) 12304-31
Lyc 0-540 12304-34
  • Frequently Purchased With
  • Customers Also Viewed

Reviews

These were a perfect fit for my O-320 D3G

Paul R Verified Purchase

SHIELDED IGNITION HARNESS 12304-33

June 8, 2023

Works well

Norman S Verified Purchase

SHIELDED IGNITION HARNESS 12304-33

May 20, 2023

Pending installation cant tell yet.

John B Verified Purchase

SHIELDED IGNITION HARNESS 12304-33

March 25, 2023

fit perfectly

Jason B Verified Purchase

SHIELDED IGNITION HARNESS # 12304-31

November 23, 2022

Installation was simple, the leads fit perfectly, and each length was exactly correct.

Dr. A Verified Purchase

SHIELDED IGNITION HARNESS 12304-33

November 10, 2022

Magaero L Verified Purchase

SHIELDED IGNITION HARNESS 12304-33

August 23, 2022

Magaero L Verified Purchase

SHIELDED IGNITION HARNESS 12304-33

June 16, 2022

Everything fit as advertised. Price was right, didnt break the bank

James T Verified Purchase

SHIELDED IGNITION HARNESS # 12304-31

June 1, 2022

Would not purchase, the mag side of harness connectors are to short,and cause it to miss fire. Surefly Mag does not recommend it!

Dale L Verified Purchase

SHIELDED IGNITION HARNESS 12304-33

December 8, 2021

Rod K Verified Purchase

SHIELDED IGNITION HARNESS 12304-33

November 17, 2021

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: I want to rebuild one of my slick mags and replace the other with an Electronic Ignition unit that comes with it's own harness. So I only need one harness for the Slick mag. Can you sell me a single harness?

Yes, part # 12304-32 is a single mag cap with 4 leads.

Q: I have a set of these wires coming in, pn 12304-33. Just want to confirm that the RF shielding has been incorporated into the wires and that an external brad shield is not required?

The 12304-33 does have the shielding built in the wire. All ACS Products ignition harnesses are shielded.

Q: Are these harnesses fit for left or right mag different?

Yes. There is a left and right side and they are labeled as such.

Q: Is pn 12304-33 good for both mags? need to change all harness for Cessna 152

Yes, this is sold as a set for left and right mags.

Q: For what kind of spark plugs is the 12304-32 harness used for?

The ACS Products harnesess all have ends to be used on 5/8" barrel aircraft sparkplugs. They do not offer an automotive style sparkplug connectors.

Q: Can you please confirm that the Slick ignition harness pn. 12304-33 comes as a set? For example contains both left and right harnesses (8 leads) for the price or do I need to buy 2 sets?

It comes with 8 leads. It is a complete harness.

Q: Does wire harness P/N 12304-33 fit Slick Mag P/Ns 4370 and 4371?

Per Vendor: The Slick mag caps are all the same size, and this harness is for Slick mags, per the application info on-line and catalog.

Q: Is the plug insulator ceramic or rubber?

This will be viton rubber.

Q: 12304-33: can it be ordered in any other color?

No, this is the only colored it is offered in.

Q: Are the caps that attach to the mag plastic as listed in one of the reviews of the product. Also is the 12304-31 harness for one mag or does it include a harness for both left and right mag? Do you have copies of any previous field approval 337 that I can submit to my FAA for a field approval?

The caps are metal and the includes the harness for left and right mags. We wouldn't have access to previous 337's. Part number 08-13303 is a certified Kelly version and wouldn't require a 337, might be a better option.

View in Catalog

View Image View in Catalog