SAME DAY SHIPPING ON ORDERS PLACED BY 2 PM | 877-795-2278

Ray Allen G205 Stick Grip

$266.95/Each
Quantity
Add to Wishlist
Part# 11-09920
MFR Model# G205

Overview

The G205 grip has five functions which include a PTT and 4 pushbutton switches.

The modern design G205 stick grips use four, flush fitting pushbutton switches to control one or two axis electric trim. The grip itself is made of semi-soft UV and oil resistant foam. The upper switch housing is made of nylon with a lightly textured finish. The G205 grips are 5.25” (133 mm) tall. The G205 grips also have a SPDT switch located on the front side of the grip. It is designed to function as a Push-To-Talk (PTT) button.

Ray Allen Company modern design stick grips can be wired directly to Ray Allen trim servos. This eliminates the need to wire relays in your trim system. However, if two grips are used, you will need either relays or a switch to transfer the control of trims from one grip to the other. The G1 and G2 series hand grip is made of semi-soft UV and oil resistant foam and the upper switch housing is lightly textured nylon. The G3 series grip is a lightly textured, BASF UV reisistant composite.

All Ray Allen Stick Grips come as a complete kit including pre-cut and stripped 26 gage Teflon™ wires. RAC grips are designed to fit a 1” stick diameter with spacers included for easy installation on 3/4”, 7/8” stick tubes. All RAC grips have insets for labels and come with a customized, die-cut label sheet. The G3 grips also include three different colored faceplates (black, light gray and light tan) to compliment your aircraft’s interior colors.

Similar Items

Two other models available:

The above label is included
with each G205 grip.
G101 G207
Click Here Click Here
  • Frequently Purchased With
  • Customers Also Viewed
  • Related Items

Reviews

Wish it was pre wired sill a great product

Mike W Verified Purchase

RAC STICK GRIP MODEL G5

February 27, 2024

Could not use because I could not activate top switched due to arthritus

Lee W Verified Purchase

RAC STICK GRIP MODEL G5

June 26, 2023

Edward L Verified Purchase

RAC STICK GRIP MODEL G5

August 25, 2022

Edward L Verified Purchase

RAC STICK GRIP MODEL G5

August 25, 2022

David Verified Purchase

RAC STICK GRIP MODEL G5

July 16, 2021

Looks good ... havent installed as yet, so I cant comment as to its functionality

Larry S
March 22, 2018

this should come with color coded wires already soldered to the switches in the handle. For the price, there is no excuse not to have that. After soldering wires to the switch terminals inside the disassembled unit, is very difficult to put it back together. Too little space is allowed for the thickness of the wires. This unit is a pain in the ass.

Owen D
March 2, 2021

This stick is a minor project which will become major if you do not have a second pair of hands and the necessary tools to complete. Stick arrives without any pre-wiring. It does include tiny connector wire. It required tweezers for one of us while the other soldered. This is a quality product, but the wiring that must be completed is for pros. We are not pros...LOL. Tools you’ll need: Voltage tester Heat Gun Wire cutter/stripper Tiny screw drivers of various sizes Tweezers..hemostats would be better Soldering Iron and Solder (not acid) Shrink tubing Additional wire to panel Be sure to test current after each connection. Once the cap is reconnected, it’s tough to remove and recheck (trust me 😉). Again, quality product but if you’re not ready to undertake a project either hand it to an A&P or buy something prewired if available.

Brian
December 29, 2017

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Does the Ray Allen G205 Stick Grip come with all the switches shown? What do these switches control specifically? Thanks

The stick grip (11-09920) will come exactly as pictured with the four buttons on top. It also includes an instruction manual to show how to hook it up, and what functions these buttons will perform. The image on the instruction manual shows these as being used for trim.

Q: Can I use the G205 for the G3X autopilot.

Per the manufacturer, the Ray Allen G205 Stick grip's buttons are Single Pole Double Throw (SPDT) Contact switches and would work if the G3x autopilot supports this.

Q: you have lateral switches for the G205 in spare parts?

Later switches for the G205 (11-09920) are not sold seperately. Visit rayallencompany.com for repair.

Q: This stick grip is held together with four very small screws (two of two lengths). Can you provide the screw sizes (diameter, pitch, and length). Thanks.

2 of the screws are 9/16" 1-64 thread, pan head screw. The other 2 are 1/4" 1-64 thread, pan head screw. Please refer to the installation manual under the "Documents" tab for more information.

Q: Are the Ray Allen G205 trim switches all momentary?

Per Manufacturer - They are all momentary. They can be wired directly to Ray Allen trim servos, eliminating the need to wire relays in your trim system when one grip is used. However, if two grips are used, you will need either relays or a switch to transfer the control of trims from one grip to the other.

View in Catalog

View Image View in Catalog