SAME DAY SHIPPING ON ORDERS PLACED BY 2 PM | 877-795-2278

Expbus Indicator Module

$199.75/Each
Quantity
Add to Wishlist
Part# 11-00432
MFR Model# EX-130

Overview

Annunciators for each solid state breaker on the EXP BUS

* Over and undervoltage warning lights
* Ammeter display
* Instrument light dimmer circuit
* Single ribbon cable installation to EXP Bus

The Indicator module is an accessory for the EXP BUS DC LOAD CENTER. This optional accessory provides several enhancements to the basic load center, all mounted in a small panel mount module, 4.6 inches long, and 2 inches wide. The module extends 2 inches in depth, behind the panel. The module provides an annunciator output for each fused output on the LOAD CENTER, which illuminates if the circuit is tripped. It also provides OVER and UNDER VOLTAGE annunciators, an AMP-METER indicator, and a light dimmer circuit for the instrument lights.

CIRCUIT TRIP INDICATORS
The circuit trip indicators show the status of each load center output, and if any output has been overloaded and tripped, the appropriate indicator will illuminate. These high brightness solid state lamps are dimmable. The lamp will remain illuminated until the load is removed (the circuit is switched off). If no circuits are tripped, the indicators will all be dark.

OVER VOLTAGE and UNDER VOLTAGE
The OVER VOLTAGE and UNDER VOLTAGE warning lamps illuminate whenever the bus voltage is below 11.5Volts, or above 16 Volts. (22 to 30V for 28V systems) These bright indicators are also dimmable.

AMMETER
The AMMETER function uses a shunt built into the EXP BUS product. The ammeter indicates current flow into or out of the battery, from -40 to plus 60 amperes.

MOUNTING
The Indicator mounts in a 4.25 by 2.0 inch rectangular hole in the panel. A flat black bezel and lens assembly compliments your instrument panel.

Reviews

Tim E Verified Purchase

EXP BUS IND2

March 11, 2024

Q&A

Please note, Aircraft Spruce Canada's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Canada assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Does the Indicator Module come with a warranty?

This indicator module is covered under our standard 30 day return policy.

View in Catalog

View Image View in Catalog