The MX170C NAV/COMM is designed to be electrically and mechanically interchangeable with the Bendix King KX170 & KX175 series of NAV/COMM radios. The channeling outputs are for 40-channel glide slope (King Glide Slope) and 200 channels (King Slip Code).
Prompt delivery and easy installation.
I had two problems when I installed the MX170C in my 1978 Mooney 201: 1-The old KX-175B was stuck, since it had not been removed from the panel since 1991. To pry it loose I had to remove the audio panel above the radio, the old LORAN to the right of the radio, and the other KX-175B below the radio. 2-The KX-175B and the MX170C require different size hex wrenches. Once I solved those problems, the MX170C went in easily and worked perfectly when I switched it on. I am very satisfied.
Having used coms with the frequency flip flop feature many times before I was a little disappointed with my new to me airplane having dinosaur KX 170s in both slots. After about a year living with them, and thinking I would have some panel upgrades done to several items at the same time, the Covid 19 thing has put dreams of a big upgrade on indefinite hold. I bit the MX 170 bullet and performed the install myself. It went surprisingly easy and took only about 10 minutes. The new MX 170 is performing great and I am so happy staging my next freq for when I need it with a push of the button! Little things like this spread out the workload and really help make flying more fun.
Radio arrived on time and in good condition, was exactly as advertised and works perfectly. Very easy install and no surprises. Very happy with purchase, product, and service.
Good replacement for a tired KX-175 in my Citabria. 5 minutes to remove the old NavCom and install the new one. Most of that time was spent removing the packaging. Good value. Like the Flip/Flop and memory functions.
Love it . Turn one screw , pull out old KX170B and slide in new MX170C and turn another screw . Like the advantage of having the flip flop channel selection .
Ive used these radios in several planes for 30 years. Slide them in and they work whether replacing King, Narco or Cessna radios. So far they have been trouble-free.
Slid right in and works perfect. Nice upgrade from the KX175 i was using.
Replaced 1 of my 2 king 170Bs original equipment in my 1979 Warrior II. Plug and play installation except for different size Allen wrench to latch in slot. Works fine channeling the KN75 glideslope ki209 indicator and KN62A DME. Works great except had to tweak squelch level a hair. Adjustable with small flathead screwdriver thru hole in front panel. Easy to tune and swap frequencies. Also can preset and select up to 50 com and nav frequencies but requires 2 hands to scroll thru presets as you must hold 1 button down and momentarily press another to scroll to next. Only comments are com volume knob also rotates to turn power off and no mark on knob to see how high you have set the com volume after turning radio on. I painted a white dot on the knob to see the volume level. Also must keep holding. the TEST button down to disable squelch to receive weak com signals. Would be better if it would flip/flop the squelch on or off. The. Old King 170B could switch the squelch off continuously on the rare occasion it was necessary. Has reception sensitivity just as good as the old King radios.
This is a replacement for the King KX 170 & 175 series Nav/Coms and the CDI you used with the King will work with the TKM 170C. Otherwise the TKM MC-60 is the only one TKM recommends.
No, the only version TKM makes is for the 14 volt replacement for the KX 170 & 175 series.
As this is a direct slide in replacement for King KX 170- and 175 series Nav/Coms, the Michel MX 170 would support the same glide slope indicators. This is a new unit.
The manufacturer’s warranty is 2 years for the MX170C Nav/Com radio.
Yes the MX170C is a direct slide-in replacement for the KX170-B. This will hook right up with the existing equipment in the aircraft that the KX170-B is hooked up to without any additional installation.
Per the manufacturer, the MX170C will automatically dim dependent upon ambient light conditions. The sensitivity can be adjusted using the trim pot located on the front panel.
This unit does not include a tray or connectors. These are sold as drop in, plug and play replacements. Trays and connectors are only available on the used market.
There was a transducer changed in the MX170B to meet new European standards, after changing the transducer TKM had to update the model number to MX170C to be in compliance with FAA standards.
Per the manufacturer a logbook entry can suffice but we recommend talking to your A&P to process any paperwork accordingly.
The display is digital.